Technical Specs

Add
additional
locks to an
existing
group
Additional locks can be added to existing Lock Groups:
1. Sign into Portal - navigate to Remote Card Authorisation > Lock
Groups
2. Select the Lock Group that you would like to add new locks
3. If you chose to not have the Portal remember the Lock Group ID,
enter the Lock Group ID manually
4. Enter the starting Lock ID - this must be an integer value. The
first lock to be initialised will be assigned this ID. After the first
lock to be initialised, the next lock will be initialised with an
incremented ID and so on.
1. Note: Check that you use a consecutive ID from the end
of the existing group
5. Enter the number of locks that you will initialise
1. Note: This value must be accurate otherwise you will
may not be able to correctly add locks to cards
6. Click Save & Commit
7. Open your Codelocks Card Manager Client software (on your
PC), place a MIFARE card on the USB card reader
8. From the list of available actions, select the "Add Locks to Lock
Group" action
9. In the CCMC software, click "Apply" - once the information has
been written to the card, a confirmation message will be
displayed and you will be able to use the card to enable RCA on
the respective locks.
1. Note: This Initialisation Card must be kept secure and/or
destroyed after use. This card is NOT the same as a
Master Card.
TO INITIALISE THE LOCKS, REFER TO Lock Initialisation.