Technical Specs

Open at set
time
Note: The Codelocks Keypad Accessory Unit is required for this function
Note: Date/time must be set for this function
1. Plug the Codelocks Keypad Accessory Unit into the lock
2. Touch the Master User Card to the lock
3. On the keypad, enter:
1. Press # • 11 • <Hour at which to unlock - hh format> ••
Dual
authorisation
Note: Where any two Card Clients are required to open the lock (either a
standalone, User Card (local), or a Remotely Authorised Card.
1. Plug the Codelocks Keypad Accessory Unit into the lock
2. Touch the Master User Card to the lock
3. On the keypad, enter:
1. Press # • 12 • <0 to disable|1 to enable> ••
User
Management
Add/Remove
User Card
(Local)
(Private Use)
1. Touch the Master User Card to the front of the lock
2. Touch a User Card to the front of the lock
1. If the User Card is not already registered, it will be added
2. If the User Card is already registered, it will be removed
3. Repeat step 2 within 5 seconds to continue adding/removing
User Cards
4. Once complete, wait 5 seconds and the lock will return to normal
operation
Note: Presenting the Master User Card to the lock will cause the lock to
unlock.
Removing all
User Cards
(Local)
(Private Use)
Perform factory reset
or with the optional Codelocks Keypad Accessory Unit:
1. Plug the Codelocks Keypad Accessory Unit into the lock
2. Touch Master User Card to lock
3. On the keypad, enter:
1. Public Use: press # • 08 • 08 ••