Technical Specs

Table Of Contents

Add/Remove

Technician

Cards (Local)

Note: The Codelocks Keypad Accessory Unit is required for this function

1. Plug the Codelocks Keypad Accessory Unit into the lock

2. Touch Master User Card to lock

3. Press # • 04 •• on the keypad

4. Within 5 seconds, touch Technician User Card to lock

1. If the Technician User Card already exists, it will be

removed

2. If the Technician User Card does not exist, it will be

added (maximum of 10)

5. Once complete, wait 5 seconds and the lock will return to public

use

Note: Presenting the Master User Card to the lock will open the lock and

remove any User Cards

Change

Master Card

Perform factory reset

or with the optional Codelocks Keypad Accessory Unit:

1. Plug the Codelocks Keypad Accessory Unit into the lock

2. Touch Master User Card to lock

3. On the keypad, enter:

1. Press # • 01 • 01 ••

4. Touch new Master User Card to lock

Remove all

Technician

Cards (Local)

Perform factory reset

or with the optional Codelocks Keypad Accessory Unit:

1. Plug the Codelocks Keypad Accessory Unit into the lock

2. Touch Master User Card to lock

3. On the keypad, enter:

1. Press # • 05 • 05 ••

Re-lock

Delay

Note: The Codelocks Keypad Accessory Unit is required for this function

1. Plug the Codelocks Keypad Accessory Unit into the lock

2. Touch the Master User Card to the lock

3. On the keypad, enter:

1. Press # • 06 • Time <02-30> ••