Technical Specs

Blocking a
Card
Via Remote Card Authorisation, a User or Technician Card can be
blocked. A card can only be blocked if the card UID is known.
1. Sign into Portal - navigate to Remote Card Authorisation >
Clients
2. Select the Client (User/Technician Card) that you want to block.
Note that multiple clients can be selected.
3. Select the Block Action and Click Save & Commit
4. Open your Codelocks Card Manager Client software (on your
PC), place a Card on the USB card reader - this will become a
"Block Card". Note that any data on this card will be overwritten
so for example, do not use your Master Card.
5. From the list of available actions, select the "Set Commands"
action
6. In the CCMC software, click "Apply" - once the information has
been written to the card, a confirmation message will be
displayed
7. Touch the Block Card to each lock on which you want to block
the cards in turn - settings will automatically be applied to the
lock.
CARD BEHAVIOUR
Use
Card
Type
Latch Default
State
Opens
Lock
Can Lock Deletes Current User Card
Public Master Open Yes No Yes
Public Technician Open Yes
N/A - lock re-locks
automatically
No
Public User Open Yes Yes Yes
Private Master Closed Yes
N/A - lock re-locks
automatically
With relevant
program/action as per POI
Private Technician Closed Yes
N/A - lock re-locks
automatically
No