User Manual

ORB180213 Rev. A

VI. SET-UP

For the 4-20 mA Input Box to be set up, current count values for two different tank volumes must be known or

recorded. The values can be determined by:

• Usingthevaluesprovidedbythefactory

• UsingtheORBtoobtainacurrentreadingofthedevice

TO OBTAIN A CURRENT COUNT READING – FOR ORB SOFTWARE VERSION 2.3

1. LogintotheORBnormally

2. Choose Manage Devices

3. Click on one of the 4-20 mA names listed

4. Click ‘Get Current ADC Value’

5. Record the value calculated

6. Add or remove material from the vessel

Repeatstepslistedabovewhenmaterialisnowempty/fulldependingonwhentherstreadingwastaken.

8. Record second value.