Specifications

第 3 页 共 4 页
Product specification parameters
No
Item
Specifications
Remarks
1
Remote control Uses
batteries
DC 3.7V(LDX 751524 Polymer lithium battery)220mah
2
Standby current of remote
control
≤10uA
3
Operating current of remote
control
≧15mA
4
Remote control distance
At least 6mm
5
Product features
Hold on 1.5 seconds turn on/off,the indicator light flashes and
goes into standby mode .Short press the switch of the vibrator (or
remote control) to make the motor vibrate;
2.Every short click on the vibrator (or remote control) switch to
convert one vibration mode. There are 10 modes (cyclic
vibration).;
USB+2.5DC plug-in charging (vibrator or remote control), the
indicator flashes when charging, long after full power.
6
Vibrator Uses batteries
DC:3.7V (YL 702025 Polymer lithium battery 300mah)
7
Machine standby current
≤10uA
8
Product PCB Item No
MLC-013
9
Machine operating current
Low speed:200mA;Medium speed:280 mA;High speed:350mA
±10%
10
Output motor current
Low speed: 200mA;Medium speed:280 mA;Hign speed: 350mA
±10%
11
The motor rotates in the
product
Low speed: 6500rpmMedium speed:8800rpm Hign speed:10000
rpm
±10%
12
The motor speed
10000±10％rpm（Dc 3.7V direct electrical test）
With eccentric
13
The motor model
N20-10160
14
Motor eccentric dimensions
Radius R5.5*3mm tungsten eccentric.
15
USB charging
voltage/current requirements
DC 5V 1A
±0.05V
16
Charging current
≤300MA
17
Product charging time
About 2 hours
18
Product battery life
Test after full charge: minimum 40 minutes
Highest speed test
19
Motor service life
≧72 Hours(Dc3.7v direct power, pause for 30 minutes every 4
hours)
20
Product materials
The product is made of environment-friendly ABS plastic, and the
vibrator is made of food-grade silicone