User Manual

KisanKraft
®
Centrifugal Water Pump for
Agriculture
KK-WPE-800C,1100C,1500C
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 12 of 20
Cleaning And Maintenance
Attention! Before performing any work on the equipment, pull the power
plug
.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts
.
Service
The pump is maintenance free. Defects must only be repaired by an authorized service station.
Cleaning
• When the pump is often transported in the course of operation, it should be cleaned out
with clear water after every use.
• In case of stationary installation, the function of the bating switch should be checked every
3 months.
• All fibrous particles which may have built-up inside the pump housing should be removed
with a water jet.
• Every 3 months the shaft ground and as should be cleaned from mud.
• Remove deposits on the floater with clear water.
The pump must not be opened by the user.
KisanKraft
®
Centrifugal Water Pump for
Agriculture
KK-WPE-800C,1100C,1500C
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 9 of 20
START UP
Please follow the safety instructions before start-up!
Please keep in mind that the label "Nameplate" may not be removed from the pump. If the label is
removed, there will be no more warranty for the tightness of the pump.
WARNING Packing materials are no toys! Children must not
play with plastic bags! Danger of suffocation!
Symbols:
Denotes risk of personal injury or damage to the tool.
Read manual before use.
Delivery height max
Size: Foreign bodies
Delivery rate max.
Immersion depth max.
In accordance with essential applicable safety standards of
European directives
IPX
Degree of protection IP