User Manual

KisanKraft
®
Warranty Certificate
(CUSTOMER COPY)
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 6 of 20
limited to, loss of use, loss of profits, loss of production, expense of substitute equipment or other
commercial loss or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties, obligations,
or liabilities. Any implied warranties, obligations or liabilities, including, but not limited to, any implied
warranty of merchantability shall be limited in duration to the applicable warranty period. Any action
for breach of any warranties hereunder, including, but not limited to, any implied warranty of
merchantability must be brought within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of KisanKraft Limited
or any of its manufacturers has the authority to increase or alter the obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not transfer
if the product is resold by the first buyer. The above warranties are extended to the first end user
(original purchaser), and no warranty is made, nor authorized to be made assignable on resale by the
first end user.
What you must do to obtain limited warranty service: To obtain performance of any
obligation under this warranty for failure during the applicable warranty period, you must deliver the
defective product, to the nearest Authorized Dealer, along with proof-of-purchase (invoice/receipt).
KisanKraft Limited, its manufacturers and its dealers reserve the right to inspect the claimed defective
part(s) to determine if the malfunction is the result of a defect covered by this warranty. Please note
that the decision of KisanKraft Limited with respect to any warranty claim is final.
After-sales Service (Including Warranty): KisanKraft Limited does not sell directly to
consumers. All sales or supplies are made through Authorized Dealers. It is the responsibility of the
Authorized Dealer to provide all after-sales service to consumers. Any warranty claim should be raised
by dealer to KisanKraft Limited as per warranty policy.
Jurisdiction:
All disputes are subject to Bangalore court’s jurisdiction.
Notes
:
➢ This purchase is not contingent upon a product demonstration. The purchaser shall satisfy himself
with the product, including any product demonstration or verification of any function, before
buying. KisanKraft Limited or its authorized dealers, including online sellers, shall not be liable to
give any on-site demonstration after purchase of any of the product.
➢ Any product once used will not be taken back by KisanKraft Limited.
➢ Warranty and After Sale Services (including but not limited to installation, Demonstration, Repair,
Routine Maintenance etc.), should be done through the Authorized Dealer selling this product.
➢ Dealers should have their own technician to provide After Sales Services to their Customers.
KisanKraft Limited provides free training to Authorized Dealer’s technicians at KisanKraft Limited’s
head office, on request from Authorized Dealer.
KisanKraft
®
Rice Mill
KK-RM-6NF4X
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 15 of 20
No.
Faults
Fault cause
Troubleshooting
4. Lubricating grease is not clean
4. Replace the lubricating
grease
9
Large
vibration of
machine
1. The matter enter the machine
1. Stop the machine and
remove the matters
abnormal
sound
2. Main axis worn
2. Stop the machine for
inspection and replace the main
axis
3. Rice machine is not fastened
3. Fasten the rice mill
4. Bearing damaged
4. Replace the bearing
10
Main axis
blocked
1. Input materials increase
sharply
1. After stopping the machine,
turn off the power supply and
close the feeding inlet. Turn the
main axis pulley by hand until
the excess materials in the rice
milling chamber are cleaned
2. The outlet pressure is too high
2. Reduce the outlet pressure
Maintenance
1. The lubricating oil in the bearing shall be sufficient and clean, and the bearing shall be
cleaned regularly. Generally, the lubricating oil shall be added once after 300 hours of
using. Pay attention to the bearing temperature during using.
2. Inspection shall be carried out for wearing parts frequently such as rice roller and
screen plate, and new parts shall be replaced in case of wear or loss of performance
of the parts.
3. Triangle belt will slip after long-term using. It should be checked and adjusted or
replaced in
4. The working place must be cleaned, and all feeding inlets must be closed after using.