User Manual

KisanKraft
®
CHAFF CUTTER
KK-FMC-500
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 8 of 16
safety shield must be installed in place. When the machine is running, it is strictly
forbidden to open the safety cover.
12. Users who have not purchased safety protective devices shall, before putting the
products into use, configure their own safety protective devices in accordance with the
standards.
Product Characteristics & Main Components
Our Chaff Cutter has characteristics like full steel plate structure, cast iron grass sticks and
tool holders, durable, can chop all kinds of forages like hay, corn Stover, etc. It is an
economical weeding equipment that is widely used at present. It has the advantages of
small size, light weight, simple installation, operation, maintenance, high production
efficiency, etc. It is the best choice among similar products.
Body, frame, grass roller, tool holder assembly, fixed blade, moving blade, feeding device,
etc.
KisanKraft
®
CHAFF CUTTER
KK-FMC-500
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 9 of 16
Working Principle
During work, The processed straw is straight into the cutting blade rotation mechanism
under the direct action of the grass roller for chopping, Using the centrifugal force
generated by the cutting roller in the rotary motion, the grass is pushed out 1-5 meters
outside the casing.
Installation and Commissioning
1. Before the machine leaves the factory, the enterprise has been installed and serviced,
and the user does not need to service again. Just install the body and motor on the
rack.
2. Fasten the mower and motor to the rack in the reserved position.
3. Then hang the belt, adjust the tightness, tighten the motor, and then jog the motor
switch. Confirm that the direction of rotation of the spindle matches the direction marked
by the mower.
Technical Specifications
Power
2.23 kW (3 hp)
Motor speed
2800 RPM
Frequency
50 HZ
Ampere
18.5 A
Productivity
600-1000 kg/h