User Manual

KisanKraft
®
Warranty Certificate
(CUSTOMER COPY)
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 6 of 16
Limitation of Liability: This limited warranty is in lieu of all other express warranties, obligations,
or liabilities. Any implied warranties, obligations or liabilities, including, but not limited to, any implied
warranty of merchantability shall be limited in duration to the applicable warranty period. Any action
for breach of any warranties hereunder, including, but not limited to, any implied warranty of
merchantability must be brought within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of KisanKraft Limited
or any of its manufacturers has the authority to increase or alter the obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not transfer
if the product is resold by the first buyer. The above warranties are extended to the first end user
(original purchaser), and no warranty is made, nor authorized to be made assignable on resale by the
first end user.
What you must do to obtain limited warranty service: To obtain performance of any
obligation under this warranty for failure during the applicable warranty period, you must deliver the
defective product, to the nearest Authorized Dealer, along with proof-of-purchase (invoice/receipt).
KisanKraft Limited, its manufacturers and its dealers reserve the right to inspect the claimed defective
part(s) to determine if the malfunction is the result of a defect covered by this warranty. Please note
that the decision of KisanKraft Limited with respect to any warranty claim is final.
After-sales Service (Including Warranty): KisanKraft Limited does not sell directly to
consumers. All sales or supplies are made through Authorized Dealers. It is the responsibility of the
Authorized Dealer to provide all after-sales service to consumers. Any warranty claim should be raised
by dealer to KisanKraft Limited as per warranty policy.
Jurisdiction:
All disputes are subject to Bangalore court’s jurisdiction.
Notes
:
➢ This purchase is not contingent upon a product demonstration. The purchaser shall satisfy himself
with the product, including any product demonstration or verification of any function, before
buying. KisanKraft Limited or its authorized dealers, including online sellers, shall not be liable to
give any on-site demonstration after purchase of any of the product.
➢ Any product once used will not be taken back by KisanKraft Limited.
➢ Warranty and After Sale Services (including but not limited to installation, Demonstration, Repair,
Routine Maintenance etc.), should be done through the Authorized Dealer selling this product.
➢ Dealers should have their own technician to provide After Sales Services to their Customers.
KisanKraft Limited provides free training to Authorized Dealer’s technicians at KisanKraft Limited’s
head office, on request from Authorized Dealer.
KisanKraft
®
CHAFF CUTTER
KK-FMC-500
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 11 of 16
Maintenance
1. Always check the fasteners of each component to prevent loosening.
2. After 1000 working hours, all the bearing parts should be cleaned and filled with the
calcium-based grease.
3. When stopping the work, the machine should be idling for a period of time, and the
residual material dust in the machine should be blown off. After stopping, the Sundries
inside and outside of the machine should be cleared. Wipe the machine clean and
store it in a dry warehouse.
4. Both the mobile knife and bottom knife can be adjusted. If sharpening is required, the
blade must be straightened, the moving knife and the fixed knife and the cutting edge
are 0.3mm. When replacing moving & fixed knife fasteners, don’t replace them with
ordinary fasteners.
5. Not following the requirements may lead to accidents and other consequences.