User Manual

KisanKraft
®
CHAFF CUTTER
KK-FMC-500
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 12 of 16
Troubleshooting
Problem
Probable Cause
Remedy
Overload
shutdown
Feeding material is more
Reduce the amount of feed
Low
productivity
1. Spindle speed is too low.
2. The moving knife and the
fixed knife wear.
1. Adjusting the tightness of the
rotational belt
2. Replace
Bearing
temperature
rise
1. The feed is too large
2. Bearing lack of oil
1．Reduce feed quantity
2. Filling lubricant
Abnormal
vibration and
noise
1. Loose fasteners
2. The frame is unstable
3. Rotor imbalance
1. Fastening bolts, etc.
2. Leveling frame
3. Remove the rotor and rebalance
KisanKraft
®
Warranty Certificate
(CUSTOMER COPY)
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 5 of 16
Warranty Policy
What is covered: KisanKraft Limited and its manufacturers warrant this product to be free from
defects in material or workmanship. All parts defective in material and workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Limited or its manufacturers of such parts
as appear to KisanKraft or its manufacturers, upon inspection, to be defective in material and/or
workmanship. KisanKraft or its manufacturers make no warranty with respect to items not
manufactured or sold by them. No onsite warranty is provided by KisanKraft Limited or its
manufacturers. Defective items must be brought/sent to our Authorized Dealer or KisanKraft Limited’s
office for service.
What is not covered: The warranty shall become null and void and neither KisanKraft Limited nor
any of its manufacturers, nor its authorized dealers assumes any responsibility, if the failure was caused
by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine or misuse, (3)
Lack of maintenance, (4) Negligence, (5) Accident or physical damage, (6) Repairs made by unauthorized
parties and/or with unauthorized parts, (7) Improper set up, adjustments, tampering or altered products
(8) Any modification to the product what-so-ever.
Important: (1) Normal maintenance and adjustments to the product is the responsibility of the
customer. (2) Normal wear and tear are not covered under warranty. (3) Rubber/plastic parts and
consumables such as blades, clutch and clutch-bell, sparkplugs, nylon line, air-filters, fuel-filters, oil seals
and gaskets etc. are not covered under the warranty. (4) Electrical Motor, Electrical Parts, Battery Etc.
are not covered under the warranty.
Incidental / Consequential Loss: KisanKraft Limited or its manufacturers will not be liable for
general damages, including bodily injuries, or for incidental or consequential damages including, but not
limited to, loss of use, loss of profits, loss of production, expense of substitute equipment or other
commercial loss or damage.
Product
Chaff Cutter
KisanKraft
Invoice
Date
Brand
KisanKraft
KisanKraft
Invoice No.
Model
 KK-FMC-500
WARRANTY PERIOD
6 MONTHS
FOR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER
IS EARLIER.
Dealer’s Invoice
Date
Dealer’s Invoice
No.
Buyer’s Info (Name, Address, Phone, etc.):
Dealer’s Stamp (Address, Phone, TIN,
etc.):
Buyer’s Sign
Dealer’s Sign