User Manual

KisanKraft
®
Agricultural Knapsack Sprayer
KK-BBS-318/199/4189/185/201/301
This warranty is null & void, if you fail to register the warranty with KisanKraft by
sending the KisanKraft Copy with dealer’s stamp.
: www.kisankraft.com
: [e-mail]
: +91.80. 6835 7800
Page 9 of 16
OPERATION INSTRUCTIONS (MANUAL)
After the packing box of new machine is opened, please check all the parts conform to the packing list.
Then assemble the machine as per the structure sketch. Before use, please wrench the cap off the
container. Pour the compounded medicinal liquid through the filter into the container slowly, then close
the cap tightly and put the machine on your back. After the pressure in the air chamber is boosted swing
the operation arm and then press the switch component to begin spray operation. It can be point-spray,
or it can be continuous spray. At the same time adjust the nut according to the requirement of the crops
in order to improve the quality of spraying.
Choose the different spray-head for spraying correctly. Accompanying with the machine delivered there
are 3 kinds of spray heads:
Fan style spray: These sprays evenly
and is suitable for spraying on low and
short stalked crops and for the spraying
of weed killer. Keep the spray head
stable and spray in the same direction
as the wind.
Conical spray head: This can be used
for spraying pesticide and insecticide,
to prevent diseases and kill insects.
Spray in the same direction as the wind.
4 Hole adjustable spray: This can be
used for spraying on the high stalk
crops and fruit trees. Its shortcoming is
the serious running off the medicinal
liquid.
OPERATION INSTRUCTIONS (BATTERY)
1. Before using the sprayer, firstly you should charge the battery and connect its connector plugs to
electrical charging supply with rating pressure 220v till indicator light turns green. It may take
about 24 hours for the first time.
2. Don’t use insoluble powder, else the deposit may lock the filter net. Use liquid chemicals only.
3. The temperature of the spraying liquid should not exceed 43
o
C(110
o
F)
4. User must use filter net to prevent impurity entering into the tank, which could cause blockage
and cause malfunction in this equipment.
5. Clean the overflow/spilled liquid chemicals on time. Take the battery out and clean it with dry
cloth at once if it touches the liquid.