PH4 ULTRA WHITE 3600°K MEGA BLUE 4000°K TYPICAL SINGLE HEADLIGHT APPLICATION PH4 pathBlazer Specifications: Single headlight with 3-pin H4 bulb and a p43t base Halogen bulb: almost twice as bright compared to stock bulbs Modulates the HIGH-BEAM, when selected in daytime Maximum load does not exceed 75W (14.
PH4 INSTALLATION: n Gain access to the back of the headlight bulb – you may have to open up the headlight bucket or peel back any rubber protective boot. o Unplug the 3-pin socket and unhook the spring clip that holds the bulb in place. Then pivot it out of the way so that the bulb can be removed. p Insert PH4 pathBlazer so that the (3) tabs of the bulb-mounting base are lined-up and spring clip clears the Daylight Sensor cable.
MOUNTING DAY LIGHT SENSOR Day Light Sensor should be mounted on the dash or fairing. It should not be facing the front of the motorcycle, in order to avoid false triggers at night from on-coming vehicles. You can zip-tie the Sensor to a brake cable or a bracket, as long as it receives unobstructed sunlight. The sense head is sealed to be waterproof. You can also choose a permanent mount in fairing or side pockets.
