Instruction Manual

Page - 24
Goldwing
tailBlazer Application
GL1800 w/Spoiler LEDs 25LED-Dual
GL1800 200GW
GL1500 SE w/Spoiler LEDs 25LED
GL1500 200GW
GL1200 and older 100HD or 20W-D
Goldwing 1800 INSTALLATION:
25LED-Dual
25LED-Dual allows programmable
Running Light intensities. This dual
input unit mounts on the back of the
trunk lid.
The plastic liner of the trunk lid has to
be removed to gain access to the 2-pin
connectors of the OEM Spoiler LEDs.
The accessory input wire MUST BE connected
using the scotch-lock connector supplied. The
trunk latch-release (18-pin) connector is a good
place to tap into. The
Light Green wire with
Black stripe is a suitable source.
200GW
200GW unit is a (1) wire splice, and it mounts
under the seat. To splice-in, locate the 16-pin
connector – under the passenger backrest.
The brake wire is
Green w/Red Stripe & Silver
Dots.
Please Note! If you have a trailer with more
than (2) bulbs, it will exceed the rated
wattage. Max Load is (6)x25W or 150W.