Instruction Manual

Page - 16
200GW
(1) WIRE SPLICE-IN (1) WIRE SPLICE-IN
tailBlazer
200GW has (3) screw-in terminals:
 Input Terminal: for Brake Input
 Output Terminal: for Output to the bulbs
 Ground Terminal: for the Ground
 Modulates the Brake bulb for a 4-sec Deceleration Warning
Trigger voltage: 10.9 volts
200GW can handle up to (4) brake light bulbs, which
are typically 25 watts each. If you have a trailer with
more than (2) bulbs, it will exceed the rated wattage.
Max Load is (6) x25W or 150W
DO NOT EXCEED THE RATED WATTAGE.
Warranty coverage will be denied, if unit is damaged from overload.