Instruction Manual

Page - 10
100HD
(1) WIRE SPLICE-IN
tailBlazer
100HD has (3) screw-in terminals:
 Input Terminal: for Brake Input
 Output Terminal: for Output to the bulbs
 Ground Terminal: for the Ground
 Modulates the Brake bulb for a 4-sec Deceleration Warning
Trigger voltage: 10.9 volts
100HD can handle up to (3) brake light bulbs, which are
typically 25 watts each. If you have additional lights or plan
to add them, we highly recommend our heavy-duty unit –
200GW.
DO NOT EXCEED THE RATED WATTAGE.
Warranty coverage will be denied, if unit is damaged from overload.