Product Manual

Page 23
vii) AC By-Pass only, No Battery Charger and Inverter Function – (‘INT’ = ‘OFF’, ‘CHG’ = ‘OFF’)
Unit is running in By-Pass mode only. When AC Input Source or Shore Power is available, AC
Output is getting the power from the AC Input Source or Shore Power. Battery Charger function is
disabled. When there is a blackout, unit will not provide AC Backup as the inverter function is also
disabled. Please note that a second battery charging source is required to charge the battery
when this mode is used.
INT
Off
AC Bypass only, Charger and Inverter Functions are disable
CHG
Off
When AC Input Source or Shore Power is available, unit is running in By-Pass Mode. AC Output is
getting the power from the AC Input Source or Shore Power.
- Display shows battery voltage (12.5V), use or button to see DC Current (always
0A because charger is disable), AC Input Power.
- is on indicates AC Input Source is in use.
- is on indicates AC Output is getting the power from AC Input source.
- icon indicates estimated battery capacity.
Note: When this setting is used, AC Charger is disabled. A separate Battery Charger or
other battery charging source is required to charge the battery.
- ‘Power’ indicator on indicates unit is On.
- If ‘AC Output’ indicator is On, it indicates AC Output Switch is turned On (AC is
available at the output socket and the output hardwire terminal).
- If ‘AC Output’ indicator is Off, it indicates AC Output Switch is turned Off (AC is not
available at the output socket and the output hardwire terminal).
- Press and hold ‘Escape’ button for 5 seconds to toggle AC Output Switch On and Off.
- ‘Status’ indicator is solid green indicates unit is running in By-Pass Mode.
Note: In By-Pass Mode, the ‘Power’ button function is disabled. It cannot be used to
turn Off the unit.
When there is a blackout (AC Input Source or Shore Power is not available), unit will not provide AC
Backup as Inverter is disabled. Display remains On for 10 seconds with the following appearance:
- Display shows battery voltage (12.6V), use or button will see DC Current (always
0A because charger is Off), AC Input Power (always 0W because Inverter is
disabled).
- icon indicates estimated battery capacity.
Note: Under this condition, Display and unit will turn Off after 10 seconds.
At any time, if the If AC Input Source is detected, unit will switch back to By-Pass Mode
automatically in about 10 seconds. During the 10 second period, ‘Power’ indicator turns
On and ‘Status’ indicator remains Off.
- ‘Power’ indicator on indicates unit is On.
- ‘AC Output’ indicator – Off (AC Output is not available due to the inverter being set to
Off).
- ‘Status’ indicator is Off
After 10 seconds, Display and unit will turn Off.
Press and hold the ‘Power’ button for 1 second to turn On the display to check the
battery status.
If AC Input Source is detected, unit will switch back to By-Pass Mode automatically in
about 10 seconds. During the 10 second period, ‘Power’ indicator turns On and ‘Status’
indicator remains Off.