Manual




Page 17

6. SPECIFICATIONS
AC1220 AC1240 AC1260 AC2430
Charger Output:
Output Current (Maximum) 20A 40A 60A 30A
Output Voltage Range:
Charge 14.2 - 15.5 V 28.4 – 31.0 V
Float 13.4 - 13.8 V 26.8 – 27.6 V
Equalize 16.0 V 32.0 V
Three stages (Bulk/Absorption/Float)
Two stages (Bulk/Absorption)
Charging Control
Constant Power Supply (Program setting)
DC Output Bank Three
Selectable Battery Type Gel, AGM, Flooded, Lithium, Program
Parasitic Current < 2 mA
Charger Input:
AC Input Voltage (Nominal) 100, 120, 220, 230, 240 VAC
AC Input Operating Range 90 - 265 VAC
AC Input Frequency Range 47 - 63 Hz
Power Consumption (Full Load) 350W 700W 1050W 1050W
Power Factor Correction Yes
Charger Efficiency > 82%
Protection and Features:
Reverse Battery Yes, unit shutdown
Over Charge Yes, unit shutdown
Over Temperature Yes, unit de-rated and shutdown
Output Short Circuit Yes, unit shutdown
DC Fuse 2*15A, 32V 2*30A,32V 3*30A,32V 3*20A,32V
Cooling Force air ventilation
Temperature Setting Hot, Normal, Cold (no sensor connected)
Battery Temperature Sensor Port RJ12 (optional battery temp. sensor use)
Digital Display Port RJ12 (optional display panel use)
Display:
LCD Display (with back lighting) Charging status, Battery Voltage
Warning and Fault Code A01, E01-09
AC Input and DC Output Connection:
AC Input Connection Hardwire or AC Cord
DC Output Connection (POS) Heavy Duty Studs (3 banks)
DC Output Grounding (NEG) Single Heavy Duty Common Ground Stud
Environmental and Operating Temperature:
Storage Range -40° to 70° C (-40° to 158° F)
Operating Range -20° to 60° C (-4° to 140° F)
Humidity 5-95%, RH non-condensing
Ingress Protection IP32
Based Unit Weight and Dimensions:
AC1220 5.3 lb., 11.6 x 8.1 x 3.4 inches (2.4 Kg, 295 x 206 x 86 mm)
AC1240 5.7 lb., 11.6 x 8.1 x 3.4 inches (2.6 Kg, 295 x 206 x 86 mm)
AC1260 8.8 lb., 14 x 8.1 x 3.8 inches (4.0 Kg, 356 x 206 x 99mm)
AC2430 8.8 lb., 14 x 8.1 x 3.8 inches (4.0 Kg, 356 x 206 x 99mm)
Regulatory Compliance:
Standards/Safety (North America) Approved to UL1236 including the marine supplement
UL1564
CSA C22.2 107.2-01
Standards/Safety (European Union)
CE marked for the low voltage directive 2006-95-EC
Complying with EN60335-2-29 battery chargers
Approved to IEC60529:2001, IP32 ingress protection level
Standards/EMC (North America) Class B according to FCC part15B and ANSI C63.4
Standards/EMC (European Union) CE marked for the EMC directive 2004-108-EC
Complying with EN55014-1, EN55014-2, EN61000-3-2 and EN61000-3-3
(as equivalent IEC standards series)
Note: Specifications are subject to change without notices.
Accessories (optional):
Remote Digital Display ACRM1201
Battery Temperature Sensor BTS-10K
PC Interface & Software ACPC01 (For monitoring and feature setting through
PC USB port)