Quick Guide

1. Put the two stop blocks at the top of the battery into the two slots at the back of the terminal.
2. Press the lower part of the battery to snap the clip into the battery holder.
Charge the Battery
Attention:
Please charge the battery before using the terminal for the first time. As per the Technical Instructions for the Safe Transport of Dangerous Goods by Air (2015-2016 Edition) by the IATA, the SOC (state of charge) of a
Li-ion battery (or cell) should not exceed 30% of its rated capacity. Therefore there might be low-battery alarm when you start using the terminal.
Before charging, please read carefully the section No Charging in the Safety Information to obtain necessary information. You can charge the battery solely or with the terminal using the attached charger, and know
charging state through the LED indicator.
LED Indicator State
Charging State
Red Light On
Charging in progress
Green Light On
90% charged
Yellow Light On
Charging failed
External View