KIRISUN PoC Two-way Radio : User's Manual : Page 19

保修卡

7.3 Adjusting the Volume

When the radio is on, rotate the Power/Volume knob clockwise to increase the volume or

counterclockwise to decrease it.

7.4 Selecting a Group

You can select a group using one of the following methods.

Method 1: After the radio registers successfully and enters standby state, rotate the Group knob to

select a group.

Method 2: In the standby interface, press the Menu key to enter the Menu interface, press navigation

keys to select Group List and then a group, and then press the OK key.

7.5 Initiating a Call

After switching to a group successfully (note: groups are set under the management platform), press

the PTT key to call the default contacts of the current group. If no contact is online, you will hear a

voice prompt “No online group member”, and then transmission request will be interrupted.

7.6 Receiving a Call

After switching to a group successfully (note: groups are set under the management platform), if a