Use and Care Manual

for those who appreciate quality, reliability & performance

CAUTION:

Besurenometalobjects,suchastacks,nails,etc.,arestickingupfrom

the surface. They can damage the sandpaper and the Turbo Accessory.

They may also cause sparks, which could ignite dust. Replace the

disposable bag after extended sanding because the dust is fine and will

plug the bag pores.

USINGTHECARPETFLUFFER(cont)

Lower the Carpet Fluffer Nozzle one notch at a time

by pushing the Toe-Touch Control

™

Upper Pedal

8 . The instant the brush contacts the carpet, stop

lowering the brush. ➤

Then engage TechDrive

by pressing down on the yel-

low“D”sideofthe“N/D”Pedal.Youarenowreadyto

fluff the carpet by pushing the cleaner back and forth

over the carpet.

NOTE: •Loweringthebrushtoofaroncableyarntype

carpets may cause the carpet to fuzz. Do not fluff

delicate carpets.

 • Thebeltshouldnotbestretchedwhenstoredforan

extended period. Make sure the green arrows line

up for storage (see page 10 for discussion of the

  BeltLifter).❏

TURBOACCESSORYSET-UP

The Turbo Accessory System can be used for a wide variety

of household jobs. It’s a sander, a buffing unit, a scouring

unit and a massage unit.

TURBO-SANDING

To set up the Turbo Accessory System as a sander,

unsnap the Sander Dust Shroud at the rear of the tool

and lift off. ➤

Rotate the clamp levers on the side of the Turbo

Accessory upwards to open the clamps. ➤

Optional Accessories

The Floor Care System-Carpet Fluffer (continued)/

The Turbo Accessory System

™