User Manual

x ... “V“: Universal program

y.yy : Version

Status information

0500 ro Module status 2 Byte

0501..0502 ro Channel status 4 Byte

<Module status>: M16..M13 , M12..M9 = hex xy = 1. Byte

M8..M5 , M4..M1 = hex xy = 2. Byte

If the bit Mn in the module status is set it indicates that an error

has occurred in the sensor module, the following applies:

M1 = 1: EEPROM - Error

M2 = 1: Flash - Error

M3 = 1: ADC - Error

M4 = 1: Configuration - Error

M5 = 1: No memory card

M6 = 1: RTC - Error

M7...M16 Are currently not occupied

<Channel status>: K32..K29 ,

K28..K25 = hex xy = 1. Byte

K24..K21 , K20..K17 = hex xy = 2. Byte

K16..K13 , K12..K9 = hex xy = 3. Byte

K8..K5 , K4..K1 = hex xy = 4. Byte

If the bit Kn in the channel status is set it indicates that an error

has occurred in channel n.

Hardware Manual COMBILOG 1022

137