User Manual

bit 1 = 1: EEPROM error bit 5 = 1: (RTC-Error)
bit 2 = 1: FLASH error bit 6 = 1: (currently not occupied)
bit 3 = 1: ADC error …
bit 4 = 1: configuration error bit 16 = 1: (currently not occupied)
<Kinfo> channel information length = 32 byte
<channel type> binary 1 byte
<channel notation> ASCII 20 byte
<data format> binary 1 byte
<field length> binary 1 byte
<decimals> binary 1 byte
<unit> ASCII 6 byte
<host input> binary 1 byte
<type of calculation> binary 1 byte
Coding <channel type>:
hex 00: Empty Channel (EM)
hex 01: Analogue Input Channel (AI)
hex 02: Arithmetic Channel (AR)
hex 03: Digital Output Channel (DO)
hex 04: Digital Input Channel (DI)
hex 05: Setpoint Channel (SP)
hex 06: Alarm Channel (AL)
Coding <data format>:
hex 00: no format
hex 01: B O O L
hex 02: INTEGER
hex 03: R E A L
hex 04: S E T 8
Hardware Manual COMBILOG 1022
126