User Manual

PROFIBUS - DP commands
DSAP ser-
vice
data to the module (Re-
qDataUnit)
data from the module (Res-
DataUnit)
read, write and tare / reset channels
56 SRD [<Reset>[<P1>[ ... [<Pn>] ] ] ] <Status> <K1> ... <Kn>
read, write and tare / reset of writeable channels
57 SRD [<Reset>[<P1>[ ... [<Pn>] ] ] ] <P1> ... <Pn>
DP global control
58 SRD keine short quit (SC)
DP get configuration
59 SRD keine short quit (SC)
DP get diagnose
60 SRD keine 80 0C 00 03 <status>
DP get parameter
61 SRD keine short quit (SC)
DP check configuration
62 SRD keine short quit (SC)
Tabelle 10.12 PROFIBUS - DP commands
Note: If more data are in the ReqDataUnit as required, they will
be ignored.
Hardware Manual COMBILOG 1022
124