Product Manual

Chapter 2 Basic Operations 2-13

2. 4 Placing Cut Sheet Media

1. Open Manual Table (1).

2. There are several size markings on Manual Table which indicate possible feed positions.

Place a cut sheet in a required size on the table between its concerning size markings then i

nsert it into Manual Feeder.

When the leading edge touches the feeding roller, the machine automatically carries and sets

the sheet at the proper position.

NOTE

(1) As a curly cut sheet will cause a mis-feed, straighten the sheet as far as possible before

printing. And set the sheet in “curl down” direction as a mis-feed can be avoided. “Curl up”

sheets tend to result in a mis-feed.

Correct (curl down) Wrong (curl up)

(2) Setting a cut sheet to the bypass feeder while printing may cause a paper jam.

Be sure to check the printer is idle (not processing a print job) before setting a cut sheet.

Size Markings

Manual Table