Product Manual

Chapter 2 Basic Operations 2-6
2. 3 Replacing the Roll Media
UI displays a sign of “Roll Replacement” when the used roll media gets empty.
Follow the later procedure to load a new roll media.
1. Open the Roll Deck (1) that has empty roll media.
With catching the Flanges (2) on both sides, lift and remove the core of roll (3).
2. Pull the green lever (4) on each Flange (2), which releases the core of roll (3). Remove both
Flanges (2).
3. With sliding the Slide Guides (5) left and right by hand, align them to the width guide lines that
match the width of actual media to be loaded. (Sliding either left or right one of 2 Side Guides
also moves the other one by the same amount.)
3
4
2
2
3
2
1
2
2
5
5