User Manual

TM
Grain CartM0238-01
5/12 1-3
Specifications
900 Grain Cart
Feature Specification
Total Capacity* 900 Bushels
Bushels/Minute - Average* 500 Bushels/minute
Vertical Auger 20" Dia flighting in 23½" Dia. tube; ¼" T edge; " T root flighting. 10° auger position
control. Lower portion of lower vertical auger hard faced flighting.
Bearings - Vertical Auger 2"
Horizontal Auger 20" LH ¼"T edge; " T Root flighting.
Bearings - Horizontal Auger 6-bolt (rear) cast iron hubs with tapered roller bearings, (front) 2" ball bearing.
Gearbox Bevel & spur gear with 2:1 ratio.
Drive Belts Two 4-band, multi-strand V-belts.
Drive Sheaves Eight groove - 7½" drive/15" driven.
PTO - 1000 RPM PTO auger drive with overrunning and torque limiting clutch.
PTO Yoke 1"-21 spline or 1¾"-20 spline.
Spindle Two 4 ½" high alloy.
Hub 20 bolt 13.189 bolt center (2) cast ductile iron.
Safety Chains Two ½" 40,500 lbs rated, grade 70, certified to ASAE S338.5.
Adjustable Discharge Spout Remotely adjustable spout with +/- 14° of up/down motion and fitted with flexible
discharge nozzle.
Tire Size/Pressure 66/43.00-25 (20 Ply) R-1 35 PSI (241 kPa) Min. 40 PSI (275 kPa) Max.
Hydraulic Requirements 5 SCVs (manual) or 2 SCV's (remote) with standard 2320 minimum system psi.
Weight - Empty 21,776 lbs.
Hitch Weight - Empty 3,400 lbs.
Hitch Weight - Loaded 5,000 lbs.
Transport Width 13'-0"
Width - Grain Tank 12'-0"
Length - Grain Tank 18'-6"
Height - Grain Tank 10'-11"
Length - Overall 27'-11
Height - Grain Discharge 13'-2"
* Approximate with 15% moisture corn. Capacity and bushels/minute will vary with moisture content of grain and/or
PTO RPM.