User Manual

TM
Grain Cart
M0238-01
5/12 3-19
Lubrication and Maintenance
1. Position the vertical auger in a horizontal position as illustrated.
2. Remove ¾" hardware from center of bearing, " spring plate hardware and " spring mounting hardware.
3. Remove spring plate, flange bearing and sleeve.
4. Pull auger out of the bottom of the auger housing.
5. Remove " hardware securing bearing spindle and remove bearing spindle.
6. Install bearing spindle onto replacement auger. Install replacement auger inside auger housing. Locate auger with
½" (See Illustration) between bottom of hinge plate and end of auger assembly.
7. Reinstall sleeve, flange bearing and spring plate.
Sleeve
" Hardware And
Bearing Spindle
Flange Bearing
Remove
Spring
Plate And
Spring
Mounting
Hardware
UPPER VERTICAL AUGER REPLACEMENT
½"
Bolt Auger Drive Lug Onto
Lower Portion Of Auger