User Manual

M0238-01Grain Cart
3-2 5/12
TM
Lubrication and Maintenance
See “V-Belt Tension Adjustment And Alignment” in Maintenance section for additional information.
4-Band V-Belts (2) Shown
DRIVE BELTS AND PULLEYS
NOTICE
Keep all oil and grease off V-belts and belt pulleys. Do not use belt
dressing on V-belts.
GEARBOX OIL LEVEL
Gearbox Oil Capacity ........1⁄ Gallons ...SAE 90 weight oil.
Remove plug from fill/check plug hole on the gearbox. Oil level should be even with fill/check plug hole. Inspect oil at
end of each annual season of use for moisture and contaminates, if found, change oil before storage.
PTO SHAFT COUPLING
Clean and grease PTO shaft coupling each time PTO
is installed.
Apply a coating of high-speed industrial coupling grease,
such as Chevron
®
Coupling Grease meeting AGMA CG-1
and CG-2 Standards to extend life of shaft splines.
Vent Plug
1
ASSY GEAR BOX 57 DEGREEA16008
1
1
SEAL 1.75-2.437-.312 (V) TC
R20952
1
SEAL 2.5-3.251-.375 (V)
R20963
22
HHCS 7/16-14 X 2.5 GR8 CS PLT
R2101
4
10
SCREW WET 5/8-11 X 3.25
R2102
5
1
PLUG 1/8-27 NPT VENT 5PSI
R2097
6
2
PLUG 1/2-14 PNT SCHD W/3M
R2099
7
QTYDESCRIPTION
PART NUMBERITEM
IP1350
JASON LUCAS
Fill/Check Plug
Drain Plug