User Manual

Grain CartM0238-01

5/12 2-19

Operation

PRINT ACCUMULATOR

This option stores an accumulated value in a memory location called “PRTACC”. Each time a “PRINT” command is

executed, the weight value on the display is added to the “PRTACC” value.

Three print formats are available:

“PRTAC1” and “PRTAC2” print formats include:

• Scale ID

• Weight

• Weight Tag (Net, Gross, Load/Unload)

• Accumulated Weight

• Print Accumulator Tag

• Date and Time

NOTE: “PRTAC1” displays data on one line and “PRTAC2” displays data on two lines.

“PRTAC3” includes Unit of Measure and Lock-On Status in addition to features listed above and displays data on one

line.

Suggested Operation Procedures

Step 1. Press and hold “NET/GROSS” for 3 seconds.

NOTE: “SCALID” is displayed followed by current ID.

Step 2. Use left arrow (PRINT/TARE) and up arrow (NET/GROSS) keys to enter a new Scale ID.

Step 3. Press “ON” to view accumulated data.

NOTE: Press “ZERO” to clear total when accumulated weight is displayed.

Step 4. Press “ON” to resume weighing.

Step 5. Press and hold “PRINT/TARE” for 3 seconds to send data from serial port and store accumulated data.