User guide

TM
Model 4900M0247-01
Rev. 5/14 2-41
Machine Operation
BULK FILL TANKS - CLEAN OUT
1. Remove bulk fill tank cleanout chute from storage location under L.H. bulk fill tank.
2. Position tube of chute under entrainer and attach hooks on each end of entrainment assembly.
3. Open cleanout doors and empty tank.
4. Close all cleanout doors and return cleanout chute to storage location.
BULK FILL SCALE PACKAGE OPTION
NOTICE
High-pressure water can damage display. Remove display before
power washing planter.
NOTICE
Remove and store display at end of planting season. Damage from
sun and weather exposure may result.
• Providesseedweightorestimatedacresremainingforeachbulkllhopper.
• Displaystotal(gross)seedweightorestimatedacresremainingforbothhopperscombined.
• Warnsoperatorwhenseedgoesbelowapre-denedlevel(ISOdisplay).
Operation of Bulk Fill Scale Package display is controlled
by buttons located on its face:
• Twoscreen-denedselectionbuttons.
• BacklightON/OFFbutton.
• UP/DOWNarrowbuttons.
• Screen positionis changedby looseningthumb screwon
mount at back of monitor and repositioning screen.
Screen defined
selection buttons
Backlight ON/
OFF button
UP/DOWN arrow buttons
Cleanout Chute Installed
Chute hooks
Cleanout Chute Storage Location