Owner's manual
Interplant Push Row Unit Drive
ITEM PART NO. QTY. DESCRIPTION
1 G10047 2 Hex Head Cap Screw, "-16 x 1¾"
2 G10229 2 Lock Washer, "
3 G11387 2 Flat Washer, " SAE
4 GD7426 2 Sprocket, 12 Tooth
5 GD1026 2 Sleeve, 1/" Long
6 G10317 1 Carriage Bolt, "-16 x 2½"
7 GD15537
G10860
G10870
1
1
1
Bracket
Retaining Ring, " (Not Included in Double Ider Assembly (GA11287))
Clevis Pin, " x 1" (Not Included in Double Ider Assembly (GA11287))
8 GD19360 1 Bushing, " x ½"
9 GD5857 4 Spring
10 G10071 1 Serrated Flange Nut, ½"-13
11 GD4887-16 1 Sleeve, 1" O.D. x /" I.D. x 1"
12 GA7154 4 Sprocket W/Bearing, 18 Tooth
13 GD4887-18 2 Sleeve, 1" O.D. x /" I.D. x 1¾"
14 G10397
G11389
2
2
Hex Head Cap Screw, ½"-13 x 2¾"
Flat Washer, ½" Plated SAE
15 G10980 1 Hex Head Cap Screw, ½"-13 x 5½"
16 G10390
G10071
8
8
Carriage Bolt, ½"-13 x 1"
Serrated Flange Nut, ½"-13
17 GA13588
G10860
G10870
1
2
2
Crossover Bracket
Retaining Ring, "
Clevis Pin, " x 1"
18 G11387 1 Flat Washer, " SAE
19 G10108 1 Lock Nut, "-16
20 GA11285
G3310-170
GA5107
G3310-158
GR0912
1 Sprocket, 38 Tooth (Used W/EdgeVac Hydraulic Drive)
Chain, No. 40, 170 Pitch Including Connector Link
Sprocket, 19 Tooth (Used W/Mechanical Hydraulic Drive)
Chain, No. 40, 158 Pitch Including Connector Link (Mechanical)
Connector Link, No. 40
21 G10039 2 Hex Head Cap Screw, ½"-13 x 1¾"
22 G2100-03 3 Bearing, " Hex Bore, Spherical
23 G3400-01 6 Flangette
24 G10620
G10312
9
9
Serrated Flange Nut, /"-18
Carriage Bolt, /"-18 x ¾"
25 GD18748
G10860
G10870
1
1
1
Interplant Carrier Bracket
Retaining Ring, "
Clevis Pin, " x 1"
26 GD19085 1 Middle Row Adjusting Bracket
27 GD0914-52 1 Hex Shaft, " x 52"
28 GA5109
GA5105
G3310-104
G3310-100
GR0912
3
3
-
-
-
Sprocket, 24 Tooth (Used W/EdgeVac Hydraulic Drive)
Sprocket, 15 Tooth (Used W/Mechanical Hydraulic Drive)
Chain, No. 40, 104 Pitch Including Connector Link, Used With 38 Tooth(EdgeVac)
Chain, No. 40, 100 Pitch Including Connector Link (Mechanical)
Connector Link, No. 40
29 GA11331 3 Hex Lock Clamp Assembly
30 G10233 21 Machine Bushing, 1½" x /", 10 Gauge
31 GD19599 4 Shim, 16 Gauge
32 GD17051 2 Idler
33 G10111 5 Lock Nut, ½"-13
34 GD4887-14 1 Sleeve, 1" O.D. x /" I.D. x "
Continued on the next page.
Model 3660M0217-02
Rev. 6/14 P52
TM