Manual

TM
Model 3140M0245-01
9/12 6-3
Lubrication and Maintenance
Inner Wheel Module Drive Chains
BUSHINGS
Lubricate bushings at frequency indicated.
Check each bolt for proper torque. If bolt is loose, removed it and inspect bushing for cracks and wear. Replace
bushing if necessary. Use onlyhardenedatwashers.Replacedamagedatwasherswithproperpart.Torque
hardware to 130 ft-lb (176.2 N-m).
Pull row unit and/or push row unit parallel
linkages (8 per row)
Row unit “v” closing wheel, covering discs/
single press wheel and/or drag closing wheel
eccentric bushings (2 per row)
Contact Wheel Arm (2 Per Wheel Assembly)
Bed leveler parallel linkages (6 per row)