Installation Guide

Prior to installation steps:
1. Unpack your new product and ensure that all the parts are contained in the
packaging.
2. Keep the product in its original box until you are ready to install it.
3. The counter top must be flat.
4. Shut off the water supply if replacing a previously-installed vessel sink.
5. Observe all plumbing and building codes in your area.
6. It is recommended that installation of the product be done by a professional
plumber.
Decide on your preference prior to installation.
Alignment of sink to cutout is critical for a superior fit and finished look. Depending on
your aesthetic preference, sinks can be installed either with a 1/4” reveal, flush fit, or
with a negative reveal. 1/4” reveal is recommended.
1/4” Reveal
Thecountertopedgesitsapproximately
1/4” backfromtheedgeofthesinkand
exposestherimofthesink.
Flush Fit
Thecountertopmeetstheedgeof
thesink,fitting flush withthesink
bowl.
1/4” Overhang
Thecountertopextends 1/4”overthe
edgeofthesinkonallsides.
7.
We are not responsible for improper sink or countertop installation. We are not
liable for any damages to sink or countertop or personal injury during installation.
3