Instructions / Assembly

2
A
D
Step2：Insert two armrests to the
chair base, make sure the slots on
the armrests fully assembled to the bottom part.
Step3
：
Insert chair back to the chair base,
make sure the
slots on the back fully
assembled to the bottom part.
C
B
.
POWER
HEAT
INTENSI TY
MODE
LOWHIGH
PULSE
PRESS
WAVE
AUTO
NORMAL
BACK
LUMBAR
THIGHS
LEGS
15Min
30Min
60Min
TIME R
No.1 and No.2 wire connect with the backrest and chair seat.
No.3 wire connects with backrest and power cord(G).
No.4 wire connects with backrest and massage remote(E).
No.5 wire connect the motor and the wire from rightside armrest,
which use to connect the control panel.
No.6 wire connect the motor and power source (F).
NOTE
1: Two same color wires connect.
2: Plug
Power Cord (G) and Power Source (F) into outlet, then
you can use all function.
MUST BE ASSEMBLED
Backrest
Cushion
Remote control（E）
Power cord（G）
①
②
③
④
Control panel
From motor
From rightside arm
Power source（F）
⑥
⑤
From power source
Massage remote