Manual

178 : Kintrek KBP-1

20 To remove the extractor, insert a small tool be-

. tween the extractor and its plunger and push the

plunger toward the rear. Lift out the extractor, and

ease the plunger and spring out toward the front.

Caution: Control the plunger and spring.

i';~

22 With the hammer at rest, pushing out this cross pin

. will allow removal of the hammer upward. By tip-

ping the hammer further forward, the hammer strut

and captive spring can be taken out, without re-

moval of the hammer.

21 The firing system has steel cross pins in a polymer

. housing, and disassembly should be done only for

repair purposes. Without removing the parts, we

will show the sequence here. First, pull forward on

the grip safety bar, restrain the hammer and pull

forward on the trigger bar/disconnector. Ease the

hammer down to fired position.

23 Unhook the grip safety spring from its post at the

. bottom of the housing.

..- --uu ---

- --- --

- ------

- - -

- -- -

- - -

- - -- ~~ ~ ~ ~ = == == ~ ~= = ~~== ~ ~

--- -- - - - - - ---

~ = = ~~~ ~ = ~ ~~ ~~ ~= ~ = - ~ -

- - _m_- _m. - ----

- - - - - -- - --

---_._---------

-- -- -

-- ---

----