Manual

~
....
"'"
174 : K:!1trek KBP-1
.
=
"
5 The ejection port cover latch and its coil spring are
. retained by two screws that require a square bit. In
normal takedown, leave this system in place.
...
...
iI>
~
OF
""
~
7 Removal of the buttplate will give access to the recoil
. spring lever, the recoil spring and its plunger. If this
system is to be taken out, it will be necessary to
depress and restrain the recoil spring plunger with a
tool, at the point shown.
6. Three square-bit screws retain the buttplate.
8 With the plunger slightly depressed, remove the
. square-bit screw that pivots and retains the recoil
spring lever. Caution: Control the spring.