Manual

I
182 : Kintrek KBP-1
Reassembly Tips:
1 When installing the sweep, be sure its rear tip en-
. gages the recess, as shown, and that its frortt end
protrudes from the ejection port.
3 When the firing system is in place, remember to
. reinstall the bolt cross pin before the action is put back
into the stock. Also, when the action is in place,
remember to push the cocking piece guard back down
into locked position.
2 Re-hook the trigger rod and grip safety rod to their
. bars in the firing system before the system housing is
swung back upward into place. The proper arrange-
ment is shown.
"...