PV0006 user manual FCC ID: BRCPCPV0006 1.
. Product appearance ① DC IN ② HDMI OUT ③ Ethernet port(LAN port) ④ USB port ⑤ TF card slot ⑥ AV OUT ⑦ Power LED ⑧IR receiver ⑨Reset 3. Installation ① Connect to TV With HDMI high-definition output and AV composite video output function, you can enjoy visual pleasure simply by connecting PV0006 and TV set with HDMI cable.
After the box connects the power supply, it will automatically start system. ③ Networking PV0006 TV box support both the wired and wireless network Access. ·Wire Access: Connect the router and the PV0006 TV box by one networking cable via Ethernet port (LAN port) (the networking cable is required to be purchased individually). ·Wireless Access: Go to the “Networking setting” of the box, select the available Wi-Fi hot points.
power on/off Homepage Menu Back Browse menu Volume- Volume+ OK: Identify key Direction key :up/down/left/right 5. Other Functions introduction ① play video/picture files from peripheral equipment’s PV0006 TV box can play the video /picture files from the SD card/TF card/USB disk, hard disk, mobile phone, personal PC which are inserted in or connected to PV0006.The box supports all formats high definition video, music and picture like m2ts/flac/jpeg.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
