Tablet PC Model Name: PC8020 Brand Name: Kinwei FCC ID: BRCPC8020
Content 1 Preface ............................................................................................................................................................................... 2 2. Safety Notices ................................................................................................................................................................... 2 3. Ready to Use ....................................................................................................................
12 Firmware upgrade.......................................................................................................................................................
deemed as an infringement to the laws of copyright. 10) Please don’t turn on the Tablet PC on in locations where wireless equipment is forbidden or when the usage of the Tablet PC will cause interference and possible danger. 11) All the wireless equipment is subject to external interference and this can affect its performance.
3.2 Product Appearance 3.
3.4 Features Overview Processor/CPU- MTK8382V Cortex-A7 quad core, CPU 1.3G, Mali400-MP2 44.3M tri/sec and 832M pixel/sec @ 416MHz; Operation System-support android 4.4 intelligent operation system Built-in RAM-Support RAM 512M/1G DDR3 (optional) Storage Memory-Support built-in ROM Flash memory 4GB/8GB/16GB (optional) External T-Flash card 1GB-32GB Display -Support 8 inch LCD screen 1280*800 multi-capacitive touch Video –Support AVI, MOV, MP4,3gp Support JPG, PNG, BMP, GIF picture formats.
Location accuracy 3m,2D cep Channels for receive satellite Restarting time 16 channels Cold boot:<35s(OPEN SKY) Warm boot:32s Warm start:<2s(OPEN SKY) 515m/s Rate WIFI Date update rate for location Maximum height 1HZ Antenna Build in GPS antenna Speed Range Wifi System Max54Mbps Max100m 2.4-2.4835GHZ 802.11b/g/n formats WCDMA/GSM 18,000m Frequency Transmission rate WCDMA 850/1900/2100 (850or900choosable) GSM 850/900/1800/1900 HSDPA 7.2Mbps/HSUPA 5.
Power status Return Recently viewed internet search Language search Functions menu WIFI Status (blue indicates Wi-Fi connected) Network status (blue indicates 2G/3G network connected) New e-mail New message Bluetooth signal Flight mode Under USB connection Under USB debugging 3.7 Switch on/off Switch on and unlocked: When the devices is in powered OFF mode, press and hold the Power key for 3 seconds to enter the Android startup process.
3.9 Operation of touch panel How to operate? You can browse over the user interface, main menu or applications by kinds of ways: Click: Just touch and click, when you’re going to input or choose applications on the main interface. Press on: Press on the icons or shortcut icons to open program you’d like, like textbox & linkage.
3.10 Main Interface Main interface as below, press blank place for seconds, you can use the interface of applications, shortcut icons or user-defined page as wallpaper. Power status Notification Remind information Time Search Voice search Application Return To view recently used Home Extend out of main interface Main interface can extend beyond of interface to provide more space for new-added shortcuts or gadgets.
Shortcut Icons Build a folder on desktop (1)Drag and overlie icons into one, see below,pic 3.4 (2)click the overlying icon, you’ll find all icons dragged inside it. See below pic 3.5: Click the unnamed folder at lower edge of black pane, hidden keyboard shows up, and then you can rename the folder. You can also change the place of icons inside by long pressing the icons. Pic 3.
Pic 3.5 Delete icons on desktop Long pressing the icon to delete, ,an icon will show up. Drag the icon to right place above until the dragged icon is in red., Change desktop wallpaper Long pressing the blank place of main interface, a window pops up. Click gallery or system default wallpaper and choose the pic you want. Voice search Touch the icon 。 Operate accordingly the goggle options. Set up your target language according to the prompting of pop-up window, and confirm.
3.12 USB Connect Storage setup Set up the storage mode before transfer files Connect MID and computer with USB cable. Connect the tablet and the computer by the USB cable. Open the notice interface, (refer to chapter 2.3- Condition and Status of MID). Clicking USB Connected, open the icon of USB Storage, see pic.3.7. USB connected successfully pic.3.7 Copy file into SD 1. Use USB cable connects MID with computer. 2.
3.13 Input Text Screen Keyboard When you need to input or edited , android keyboard will show up. Choose input method Open application setup。 Click Language and input All input installed will list on text setup. Choose your target input. Input Method use and switch 1 Capital and small letter 2 Digital input 3 Insert whitespace 4 Execute 5 Select character on the left of cursor and long press to select all. 3.
be created on the desktop, or press on and drug the icon to desktop. Note widget shortcut will not be created if there is no enough space left for. 4 General Setup 4.1 SIM Card management, WIFI & Network SIM Card management Through SIM management, SIM setup can achieve, for example, turn on/off SIM or turn on/ off data connection. pic.4.0 Connect WIFI Choose setup application on main interface. Turn on WLAN, MID will scan automatically available Wi-Fi network.(pic.4.
pic.4.2 Input network SSID,name of target network, and click “save”. Click user name saved and click “connect”.( pic.4.3) pic.4.3 WI-FI status: Under WIFI Status turned on, user can see the notice at bottom right corner when WLAM network available. Connect WLAN during sleep mode. Click icon top right at screen,and choose high class mode。 Click “keep Wi-Fi on during sleep” and choose accordingly the option prefer to.
pic.4.4 4.2 Bluetooth(Optional) . Choose settings application on main interface. Turn on Bluetooth as shown below. The device will find the nearby device automatically when you click “search for devices”. pic.4.5 Click the target device name, input the password and choose “pair” for sure after “Bluetooth pairing request” window pop up. Click icon ,entering into the interface, and then you can operate accordingly. Target device name can renamed if need.
pic.4.6 4.2.1 Bluetooth setup Rename Click icon ,choose “rename tablet” and change to the name as what you want. pic.4.7 Visibility Timeout Click “visibility timeout” and choose time options accordingly.(Note:visibility timeout refers to the time setup of device be visible.
pic.4.8 Show received files 1. Open a file transfer service, allowing support Bluetooth FTP client connect Bluetooth devices, to achieve access to the server file and operations. 2. Bluetooth distance sensor Turn on Bluetooth distance sensor, when two Bluetooth devices relatively far distance, or broken links, a Bluetooth device will make prompt sound 4.
WIFI data usage Click icon pic.4.
pic.4.11 4.4 More... 4.4-1 Airplane Mode Airplane mode is function for quick turn off of WIFI & SIM Card. WIFI & SIM card is out of reach under airplane mode, but it recovers once airplane mode turn off 4.4-2 VPN Open VPN and add VPN network, Input network name and related server address, and click “save” for sure.
pic.4.12 Click VPN created, Input VPN Account & password accordingly, and click “connect” to finish. pic.4.13 4.4-3 Tethering & portable hotspot Tethering & portable hotspot Click the app “settings” on menu interface. Make sure the device is under Wi-Fi connected. Choose More… and click “Tethering &portable hotspot”.
pic.4.14 pic.4.15 Clicks “keep Wi-Fi hotspot on” and choose suitable period. Click icon “return”,opening portable Wi-Fi hotspot and click “setup Wi-Fi hotspot”.
pic.4.16 Set up password for network encryption, and password should no less than 8 digits. 4.4-4 Mobile Networks Data enabled Under data enabled, you can use 2G/3G network through the SIM card. Data roaming Under data roaming, you can surf the internet by SIM card in the situation of roaming. This data roaming means roaming between operators, but not areas. Network mode Choose 2G/3Gfrequency channel.
pic.4.18 (2)Choose access point name (APN) Choose the corresponding connection method see as below picture pic.4.
www browser on mobile internet, it can log in the similar web page the same as we surfing on the computer. Meanwhile, the charges for them are different.) (3)Network operator Click operator, tablet system will automatically search available networks GSM and WCDMA, see as below picture pic.4.20 4.4-5 GPRS data priority mode When open the GPRS date priority mode, it will give preference to your use of the telephone network. 4.
pic.4.22 Vibrate Click Vibrate which can realize the vibration effect on MID when you dial phone call, see as above picture. Volumes Click Volumes which can control the volumes of ringtone & notifications、alarms, see as below picture pic.4.
Voice call ringtone Click voice call ringtone and you can choose the different ringtone as you like, see as below picture pic.4.
pic.4.25 System It can be checked by ON/OFF, “Dial pad touch tones”, “Touch sound”, “Screen lock sound”, “Vibrate on touch”. (Notes: except standard, silent, meeting, outdoor mode can only be chosen but not be set.) 4.6 Display 4.6-1 Brightness Click setting Apps Click Display Brightness. When pop-up brightness Settings panel, you can drag the brightness slider to adjust degree between dark and bright.
pic.4.26 Once you set up the brightness, click ok. 4.6-2 Wallpaper Click Setting Apps Click Display wallpaper You can choose the wallpaper as you like, such as live wallpaper - gallery (custom) - wallpaper (system) - video wallpaper, as shown in picture pic.4.28 4.6-3 Automatic rotation System as the default open, when closed, the system will not rely on gravity induction to shift MID panel. 4.
pic.4.30 4.6-5 Font Size Click Font Size which can adjust font size of the MID, see as below picture pic.4.31 4.7 Storage Open setting AppsStorageDEFAULT WRITE DISK, you can choose the preferred installation space when you install new applications. Check available space of SD Card and MID.
Check SD card and MID storage Enter setting interface。 1. click storage to see the storage 2. INTERNAL STORAGE System is stored as a MID space reserved for system files; see below picture, this space can't see content. pic.4.35 (2) USB STORAGE USB Storage is MID NAND memory. If want to check the storage content you can go to main menu files managements for checking.
pic.4.36 2. SD Card In the storage you can check the SD Card total space, available, unmounts SD Card and Erase SD Card, and see as below picture pic.4.
Remove SD Card safely Click setting Apps Click storage Click uninstall SD Card Now you can remove the SD Card safely. Notes: If you remove the SD Card correctly, it can effectively protect it and increase the usage life of the SD Card. 4.8 Battery Click settings battery and then to check the battery using status as shown below: pic.4.38 4.9 Apps 1. Please select setting in the application list. 2.Choose application and enter and then you can manage and delete the installed applications.
pic.4.40 4. Check the running applications of their usage and available space see as below picture pic.4.41 4.10 Account 1. Click setting 2.
pic.4.42 3. For example tap Google, see as picture pic.4.43 4.
pic.4.44 4.11 Location access Click setting and choose location access, see as picture pic.4.45 4.12 Security Set up screen lock You can use password and unlock pattern to lock the touch panel and protect your MID. Notes: Once you have set up the screen lock, every time when you reboot and unlock the touch screen will request to enter your password. Set up unlock pattern 1. 2. 3. 4. 5. 6. In the main menu page please click setting Application.
pic.4.50 Set up unlock PIN password In main menu please tap settingsSecurityLock screenin the pop up text set area choose PINtype new PIN password(finger) and tap Nexttype again new PIN password and tap OK. Set up password In main menu please tap settingsSecurityLock screenin the pop up text set area choose Passwordtype new Password(alphanumeric) an tap Nexttype again new Password and tap OK. Unknown sources In main menu tap Settings SecurityUnknown sources, see as shown picture pic.4.
pic.4.52 Tap settingsLanguage & inputAndroid keyboard settingsinput language, see as below picture pic.4.53 In the effective input method you can change the default language as you need.
pic.4.54 Return to Language & input, tap default to choose input method as you need. See shown picture pic.4.55 4.14 Backup and reset Tap Backup my date after you have logged in Google account and connected Wi-Fi the system will automatically backup your date to Google server. For some reasons you have to restore the factory settings, please tap restore the factory settings.; If you want to format MID NAND, please click on Erase USB Storage and tap reset tablet is ok.
pic.4.56 4.15 Date and Time As default setting, system will set the date and time automatically by using network-provided values. Set the date and time zone by hand 1. Click settings 2. scroll down the screen and click date and time. 3. Close Automatic date & time 4. Close Automatic time zone 5. Click Select time zone, and then choose time zone in the list. Scroll down the screen you can check more time zones. 6.
pic.4.57 Notes: If you use the time which network provided automatically, you are unable to set the date and time zone? 4.16 Scheduled power on off Tap settingsScheduled power on & off, see as below picture 4.58; pic.4.58 4.17 Accessibility 4.17-1. large text Click Large text can make the system font become larger 4.
automatically hang up but will not turn to sleep 4.17-3.Touch & hold delay Click Touch & hold delay can adjust the delay time, see as shown picture pic.4.59 4.17-4. Install web scripts When you open it system will allow you install web scripts, but it will increase the security risk when you browser website. 4.18 Developer options 4.18-1 USB Debugging Once you open USB debugging, it can read the MID with some software. But when it opened the USB storage need to manually bring up before us. 4.
pic.4.60 4.19 About MID MID status 1Enter the settings application 2 Click About MID. Can view the status information, model No., Android version, version no. and other information. 3 Click “status information”, Can view the battery status, battery, SIM status, IMEI No., IP address, etc. 5. Multimedia 5.1 Music Player In the application menu or on the desktop, click the icon interface, select a different way to find songs pic.5.
pic.5.2 Drag the playback progress bar to adjust audio playback progress Music player button operation is shown in pic 5.2 5.2 Video In the application menu or on the desktop, tap the icon Video player buttons described in pic 5.3 to enter into the video player interface. pic.5.3 5.
Check Photos 1 In the application menu or on the desktop, tap the Gallery application 2 Enter the gallery, tap the folder to check the included pictures 3 Tap the picture you want to view, the system will automatically view in full screen mode. 4 Photos can zoom in or zoom out by separate or fold two fingers. Double clicks can make it too.
Camera mode Switch flash light Switch front & Rear camera View photos and videos Click shooting Video camera Panorama mode Camera setting Effect setting pic5.4 Submenu Camera Video Pic5.5 5.5 FM Radio (Optional functions) In the application menu or on the desktop, tap the icon Connect Headphones Select the top right corner button pic 5.
Select the search, Then FM band can be found in pic.5.
6 Communication function 6.1 Phone 6.2 SMS 6.2.1 In the application menu or on the desktop, tap the icon 6.2.
6.3 Contacts In the application menu or on the desktop, tap the icon to enter into the Contacts interface pic.6.
7 Internet 7.1 Browser When Wi-Fi or net work is well connected, click pic 8.1 to input IP address and can surf internet. As Pic 8.1 7.2 E-mail Email application with e-mail setup wizard, can add common Web e-mail service provider (Such as Yahoo, Gmail and 163 other provider) external POP3 or IMAP e-mail account. Figure 8.2 Pic 8.
4 Input the account name and email name, then tap Done 5 If the mailbox is available, will automatically enter your inbox B Delete mail account You can delete the set up POP3 or IMAP email account from your MID 1 taps the icon 2 Enter into your inbox 3 Click the Menu key 4 Tap the Settings 5 Right down select Delete Account 6 Click OK to remove C Send E-mail message 1 Tap to display your inbox 2 Click the e-mail inbox will automatically refresh, click to read 3 Click the Menu key to pop up the menu 4 Tap th
Pic 8.1 After successfully positioned, blue part will be transformed into green. And display the latitude, longitude and altitude, speed, position location time. pic 8.2.Satellite value represent positioning signal of the intensity, Positioning time associated with the choice of setting time zone range. If time does not match with positioning location time, please check your time zone selection is correct Pic8.2 9 Other Applications 9.
Clock Setting pic 9.1 9.2 Calculator 1 Tap on the icon 2 Enter The calculator basic panel 3 Touch counter number on the panel or operator to calculate pic 9.2 9.3 Explorer Explorer with the TF card files or folders to copy, cut, delete, rename and other operations can also share the file, install apk and other functions In the application menu or on the desktop, tap the icon Figure 9.
Pic9.3 A. Some operations, such as copy, cut, delete, rename, etc. Select a folder or file, long press a folder or file to enter into Figure 9.4 Interface. pic 9.
Pic9.5 C .Share the file: Select a file and long press this file, In the top click on " " In the pop-up list, select "Share" item. According to the pop-up list to select the way you want to share Pic 9.6 D. Install apk file: select the suffix. Apk file on the Explorer, pop up the installation program, follow the prompts to install third-party software E.
Figure9.
10 Application Installation 10.1 Installation Install third-party applications 1 Tap on "Explorer" application, select the application you want to install 2 Press and hold the application you need to install 3 Pop-up installation options, click Install apk 4 Follow the installation wizard to complete then can be run. Note: Applications only with APK suffix are compatible with system. 10.
6. Can not open website 1. Please keep the routing and MID in a effective distance 2. Please reboot wifi and try it again. 7. MID run slowly sometimes This is normal. Please close some temporarily not using application, and unload some third-party applications on the high-level task management to release more system resources. 12 Firmware upgrade 1.
59
Tick “create a desktop icon 60
61
3. After click “finish”, it shows “ ”,click“ ”to choose “MTK Android Upgrade Tool” >“public_KEY_Downloads_1000000_Time_20161231 ” > “ZZZZZZZZZZZZZZZZZZZZZZZZ.
4. Click”OK”,open the upgrade tool.(remarks: open the upgrade tool, it includes 3 items” “Download”, the default item is “Download”.
5. Other options just choose default one. Click “ ” on the right, double click “KH5015_EMMC_MT6582.
6. Then click“ ”on upper right shown as above picture. 7. After device has been turned off; connect the device to the PC by the USB cable supplied with the device.
Choose “Include this location in the search”- “MTK Android Upgrade Tool” > “Driver_Auto_Installer_v1.1236.00” > Smartphone Driver > “x86” > “Infs”, Click “OK”. Shown as below picture.
Then click “NEXT”, the system will detect and install the driver automatically, finally click “Finish”, see the pictures as below: 67
The “Found New Hardware Wizard” window will pop up on the bottom right corner as shown below.
8. Pull out USB cable,then click “ ,” shown on the upper right. Connect the tablet pc to computer, shown as below picture: 9.
10. When the upgrading is 100% done ,“Download finished” pops up. The upgrading process is done, and USB cable can be pulled out. 11.Pull out the USB cable, power on the tablet PC(note: the tablet pc can not be power on if out of electricity, please charge it for while.) NOTE:1. Please don’t disconnect the USB cable during the updating process because this will cause update failure or possible system failure of the device. 2.
3.Having installed upgrade tool before, just click the shortcut“ step 4, and no need to install a MTK driver the second time.
72
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.