User's Manual

19
6.System setting
6.1.1 Wi-Fi Setting
On the desktop, tap to enter into the setting interface ， enter WIFI function ， and then tap
a. Press WIFI and the system will search wireless networks automatically. Shown as above picture.
b. Connection ( It is dynamic IP address and needn’t set the IP address)
The dynamic IP address is assigned by WIFI router. If it is automatically assigned the IP address, and then click
the Wi-Fi network name. For example, click “Test II” it will pop up a connection window where you can input the
correct security code and then tap “connect”. The system will connect to the network automatically, and once
connected will show a Status of “Connected” You can see the network connection status by pressing the network
name, see the figure below:
There will be a WIFI icon in the top right corner once it connected successfully.