User's Manual

48
4.15 Date and Time
As default setting, system will set the date and time automatically by using
network-provided values.
Set the date and time zone by hand
1． Click settings
2． scroll down the screen and click date and time.
3． Close Automatic date & time
4． Close Automatioc time zone
Click Select time zone, and then choose time zone in the list.
Scroll down the screen you can check more time zones.
5 Click set date and tap up and down button to select Day, Month and
Year, thne tap “set” to finish the setting.
6 Tap set time, and tap up and down button to select hours , minutes,
choose AM and PM to set morning or afternoon(it will not support
24-hour format), and then tap “set” to finish the setting.
7 Click Use 24-hour format, you can shift between 12-hour and
24-hour format. And the time format will applied in the alarm clock.
8 Click choose date format and choose the date format which will
show in your MID.
Pic 4.57
Notes: If you use the time which network provided automatically, you are
unable to set the date and time zone.