tablet pc Brand Name: Kinwei/Titan Model Name: PC7067ME FCC ID: BRCPC7067ME
Content 1 Preface ....................................................................................................... 1.1 Acknowledgements .............................................................................. 1.2 Notes .................................................................................................... 1.3 Satry Notices ........................................................................................ 1.4 Abbreviations/Term .................................................
6 7 8 9 10 11 5.1 Music .................................................................................................... 5.2 Video .................................................................................................... 5.3 Picture .................................................................................................. 5.4 Camera ................................................................................................ 5.5 FM Radio .......................................
1 Preface 1.1 Acknowledgements Dear Customer, Thank you for purchasing our products, the HD tablet pc in 7 inch. Adopting master chip MT6575, 2*Cortex-A9 framework and O.S. Android 4.1, CPU speed at 1.0 GHz, the device is easily compatible with third party applications. With functions like build-in 2G, 3G, WIFI, BT, GPS, FM, Voice call etc, you can achieve wireless communication or use wireless network easily, surfing the internet whenever and wherever possible.
1.3 Safety Notices Please read present section before using the device. Please comply with any related restrictions and rules; do not use the device during driving or where blasting operations are in progress. Please don’t turn on the device on in locations where wireless equipment is forbidden or when the usage of the device will cause interference and possible danger.
n/ Term MID Mobile Internet Device Mobile internet terminal WIFI Wireless Fidelity WLAN based on IEEE 802.
2 MID Introduction 2.1 Ready to use Battery Charging Charge the battery firstly before initial use. 2.1 Please charge the MID with our original power adapter. Note: Please use the original accessories and battery provided with the device, do not use the incompatible products in case of damage unexpected, any damage of problem result from this could be beyond of our range of maintanence.
3 Quick Guides 3.1 Packing List Components MID Device Leather Case(optional) Quantit y 1 1 Keyboard/Mouse (optional) 1 TF (Micro SD) Card (optional） 1 Power Adaptor Earphone(optional) USB Cable USB HOST tie line（optional） Specification（optional） User Manual（optional） CD-ROM 1 1 1 1 1 1 1 Warranty Card （optional） 1 3.2 Product appearance 3.
E Front Camera Static and dynamic camera F receiver Telephone receiver G POWER Short press this button to enter sleeping/wake up mode, press long to switch ON/OFF H Volume - Decrease volume I J K Volume+ HD MIC USB port Stereo Earphone Jack SIM Card slot 1 SIM Card slot 2 TF card Slot Television antenna Increase volume 1080P output jack MIC_5PIN USB Port L N O P Q Stereo Earphone Jack SIM Card slot 1 SIM Card slot 2 TF (Micro SD) Card Slot Signal receiving antenna for analog TV or ISDB-T dig
Return Recently viewed Language search Functions menu Network status WIFI Status （blue indicates Wi-Fi connected） (blue indicates 2G/3G network connected) New e-mail New message Bluetooth signal Under USB connection Flight mode Under USB debugging 3.4 Switch on/off Switch on and unlocked: When the devices is in powered OFF mode, press and hold the Power key for 3 seconds to enter the Android startup process.
（2）Short press the “POWER” key when the device is in use will make the system enter SLEEP power save and locked mode. Turn on the screen under inactive state Under the power saving mode, the display is just turned off and showing a black screen. This means that music play, movies play etc. will still continue to run. Short press the power key, the system will return to locked mode, unlock by pressing and moving the icon as pic show. Pic. 3.1 3.
until the icon be drugged to the target place. Rotate To most interfaces, for example, the input text and music interface, direction can be changed easily just by swaying the device the 3.7 Main Interface Main interface as pic.3.2, press blank place for seconds, you can use the interface of applications, shortcut icons or user-defined page as wallpaper. Menu search Voice search Power status Return Pic. 3.
Pic. 3.3 Shortcut Icons Build a folder on desktop （1）Drug and overlie icons into one, see pic3.4. （2）click the overlying icon, you’ll find all icons drugged inside it. See pic.3.5. Click the unnamed folder at lower edge of black pane, hidden keyboard shows up, and then you can rename the folder. You can also change the place of icons inside by long pressing the icons. Pic 3.
Pic 3.5 Delete icons on desktop Long pressing the icon to delete, ，a icon will show up. Drug the icon to right place above until the drugged icon is in red., Change desktop wallpaper Long pressing the blank place of main interdace, pops up. Click gallary or system defauldt wallpaper and choose the pic you want. a window Voice search Touch the icon Operate accordingly the goggle options. Set up your target languagea according to the prompting of pop-up window, and confirm.
3.8 Apps Click on the top right corner of the screen, see pic 3.2, then choose your target app after entering into the main interface, see pic 3.6. Pic. 3.6 3.9 USB Connect Storage setup Set up the storage mode before transfer files. Connect MID and computer with USB cable. Open the notice interface, （refer to chapter 2.3- Condition and Status of MID）. Clicking USB Connected, open the icon of USB Storage, see pic.3.7.
pic 3.7 Copy files to memory card Connect MID and computer with USB cable. Set up storage mode. Opening the icon of my computer, check removable disk(x). Find out the target files and copy them to this removable disk(x). Click “close USB Storage device” after copy finishes. Note：You get no access to the memory card in MID when the MID is under USB Connection, but it is workable once USB Connection be breaking. 3.
⑤ ① ④ ② Pic 3.8 ③ 3 1 Capital and small letter 2 Digtal input 3 Insert whitespace 4 Execute 5 Delect character on the left of cursor and long press to delect all. 3.11 Use Skills Widget interface Click “widget” or slide on the screen to left to enter into widger interface. Long press the widget to creat a shortcut, and you can enter related app quickly just through the shortcut icon on desktop.
4 General Setup 4.1 SIM Card management, WIFI & Network SIM Card management Through SIM management, SIM setup can achieve, for example, turn on/off SIM or turn on/ off data connection. As pic 4.0 Pic 4.0 Connect WIFI Choose setup application on main interface. Turn on WLAN, MID will scan automatically available wifi network. See pic 4.1.
Pic. 4.1 Add Network Click icon Pic. 4.2 Input network SSID，name of target network, and click “save”. Click user name saved and click “connect”. As pic 4.3 top right at screen, see pic4.2.
Pic 4.3 WIFI Status. Under WIFI Status turned on, user can see the notice at bottom right corner when WLAM network available. Connect WLAN during sleep mode. Click icon class mode。 Click “keep Wi-Fi on during sleep” and choose accordingly the option prefer to. See pic4.4. top right at screen, see pic4.3，and choose high Pic 4.
4.2 Bluetooth . Choose settings application on main interface. Turn on Bluetooth as shown below. The device will find the nearby device automatically when you click “search for devices”. See pic. 4.5. pic 4.5 Click the target device name, input the password and choose “pair” for sure after “Bluetooth pairing request” window pop up. Click icon ，entering into the interface see pic4.6, and then you can operate accordingly. Target device name can renamed if need. pic 4.
4.2.1 Bluetooth setup Rename Click icon , as pic. 4.7 shown，choose “rename tablet” and change to the name as what you want. Pic 4.7 Visibility Timeout As pic. 4.7 shown，click “visibility timeout” and choose time options accordingly. See pic4.8.（Note：visibility timeout refers to the time setup of device be visible. pic4.8 Show received files As pic. 4.7 shown，choose “show received files” and you can see all the files download or upload.
Advanced setting. As pic. 4.7 shown ， choose “Advanced setting” and set up accordingly, as pic4.9. Pic 4.9 FTP Server Turn on FTP Server means access to server-side files and operation by client-side is allowed. Proximity reporter Under proximity reporter turn on, the device will prompt by make a noise when distance between the two devices is too far away or when disconnect. 4.3 Data Usage SIM Card data usage, see pic.4.
pic4.10 WIFI data usage Click icon ，Choose “Show Wi-Fi usage”, see pic. 4.11. pic 4.11 4.4 More... 4.4-1 Airplane Mode Airplane mode is function for quick turn off of WIFI & SIM Card.
4.4-2 VPN Open VPN and add VPN network. Input network name and related server address, and click “save” for sure. Click VPN created ， as pic.4.13 shows. Input VPN Account & password accordingly, and click “connect” to finish. Pic 4.13 4.4-3 Tethering & portable hotspot Tethering & portable hotspot Click the app “settings” on menu interface. Make sure the device is under wifi connected. Choose More… and click “Tethering &portable hotspot”. Pic. 4.
Pic 4.15 Click “keep Wi-Fi hotspot on” and choose suitable period. Click icon “return”，opening portable Wi-Fi hotspot and click “setup Wi-Fi hotspot”. Pic 4.16 Set up password for network encryption, and password should no less than 8 digit. 4.4-4 Mobile Networks Data enabled Under data enabled, you can use 2G/3G network through the SIM card.
Under data roaming, you can surf the internet by SIM card in the situation of roaming. This data roaming means roaming between operators ,but not areas. Network mode Choose 2G/3Gfrequency channel. GSM means 2g network, this device support GSM 850/900/1800/1900MHz and 3g WCDMA 2100MHz. 3g frequency channel WCDMA 850MHz/900MHz/1900MHz is optional. See pic 4.17. Pic 4.17 （1）Access Point Name(APN) Click Mobile network settings, see as below picture 4.18: pic 4.
Pic 4.19 Notes : (CMWAP transfers the date via GPRS, it can only visit wap webpage, but CMNET supports www browser on mobile internet, it can log in the similar web page the same as we surfing on the computer. Meanwhile, the charges for them are different.) （3）Network operator Click operator, tablet system will automatically search available networks GSM and WCDMA, see as below picture 4.20; Pic 4.20 4.
4.5 Audio Profiles Open setting and choose Audio profiles and you can choose different mode for setting see as below picture 4.21; Pic 4.21 click General and access to setting see as below picture 4.22; Pic 4.22 Vibrate Click Vibrate which can realize the vibration effect on MID when you dial phone call, see as above picture: Volumes Click Volumes which can control the volumes of Ringtone & notifications、 alarms, see as below picture 4.
Pic 4.23 Voice call ringtone Click voice call ringtone and you can choose the different ringtone as you like, see as below picture 4.24; Pic 4.24 Video call ringtone Click video call ringtone and you can choose different mode of ringtons, see as below picture 4.
Pic 4.25 System It can be checked by ON/OFF, “Dial pad touch tones”, “Touch sound”, “Screen lock sound”, “Vibrate on touch”. (Notes: except standard, silent, meeting, outdoor mode can only be chosen but not be set.) 4.6 Display 4.6-1 Brightness Click Click Display Brightness. When pop-up brightness Settings panel, you can drag the brightness slider to adjust degree between dark and bright. See as shown picture 4.
Pic 4.26 Once you set up the brightness, click ok. 4.6-2 Wallpaper Click Setting Apps Click Displaywallpaper You can choose the wallpaper as you like, such as live wallpaper - gallery (custom) - wallpaper (system) - video wallpaper, as shown in picture 4.27; pic4.27 4.
System as the default open, when closed, the system will not rely on gravity induction to shift MID panel. 4.6-4 Sleep Click Setting Apps Click Display Click Sleep When pop-up the page of sleep time setting, you can choose the sleep time as you like. See as below picture 4.30; pic4.30 4.6-5 Font Size Click Font Size which can adjust font size of the MID, see as below picture 4.
Pic 4.31 4.6-6 HD Setting When connect the HDMI Cable, in the lower right corner it will show HDMI Cable has accessed in. Click HD Setting, you can see below picture 4.32; Pic 4.32 . Video Once you open video it can make HD audio output. Never Click Never, MID will not turn into sleep. Video resolution Click Video resolution which can adjust the resolution of video, see as shown picture 4.33; Pic 4.
4.7 Storage Open setting AppsStorageDEFAULT WRITE DISK, you can choose the preferred installation space when you install new applications. Check available space of SD Card and MID. Enter into setting Apps Click storage to check total space. Internal storage Internal storage which is the system files storage space but can not check the content, see as picture 4.35; Pic 4.35 USB STORAGE USB Storage is MID NAND memory.
Pic 4.36 SD Card In the storage you can check the SD Card total space, available, unmount SD Card and Erase SD Card, and see as below picture 4.37; Pic 4.
Now you can remove the SD Card safely. Notes: If you remove the SD Card correctly, it can effectively protect it and increse the usage life of the SD Card. 4.8 Battery Click settings battery and then to check the battery using status as shown below: Pic 4.38 4.9 Apps Please select setting in the application list. Choose application and enter and then you can manage and delet the installed applications. In the lower left corner you can check the syetem storage space, see as below picture 4.
Pic 4.39 Check internal storage space; see as below picture 4.40; Pic 4.40 Check the running applications of their usage and available space see as below picture 4.
Pic 4.41 4.10 Account Click setting Click Add account, see as picture 4.42; Pic 4.42 For example tap Google, see as picture 4.
Pic 4.43 Once login successfully you can open synchronization function, see as picture 4.44; Pic 4.44 4.11 Location access Click setting and choose location access, see as picture 4.
Pic 4.45 Google Location When you open Google location, you can fix MID position via WIFI GPS satellites Use GPS on your MID which can pinpoint your location GPS EPO assistance Use GPS assistance date (EPO) to speed up GPS positioning, but it need insert SIM Card and generate lots of traffic. EPO Setting Tap EPO Setting to check EPO position date and whether it automatically downloads. Pic 4.
A GPS. Tap A-GPS settings and you can see below picture 4.47; Pic 4.47 Disable after Reboot Choose disable after reboot the A-GPS will automatically closed when you reboot MID. Network Request Use network request to get your location via internet Network Used Open network used you can choose the different mode of network, see as picture 4.48; Pic 4.48 Profile selector Choose profile selector you can shift them as you like，see as below picture 4.
Pic 4.49 Location and Google search Use Location access and Google search, you can use your location information to improve search result and other services. 4.12 Security Set up screen lock You can use password and unlock pattern to lock the touch panel and protect your MID. Notes: Once you have set up the screen lock, every time when you reboot and unlock the touch screen will request to enter your password. Set up unlock pattern 1. In the main menu page please click setting Application. 2.
pic4.50 Set up unlock PIN password In main menu please tap settingsSecurityLock screenin the pop up text set area choose PINtype new PIN password(finger) and tap Nexttype again new PIN password and tap OK. Set up password In main menu please tap settingsSecurityLock screenin the pop up text set area choose Passwordtype new Password(alphanumeric) an tap Nexttype again new Password and tap OK. Unknown sources In main menu tap Settings SecurityUnknown sources, see as shown picture 4.
Pic4.51 Notes: Click unknown sources and then you can install APK files by hand successfully. 4.13 Language & input Tap settingLanguage & input. You can choose the language as you need. See as below picture 4.52; Pic 4.52 Tap settingsLanguage & inputAndroid keyboard settingsinput language, see as below picture 5.
pic4.53 In the effective input method you can change the default language as you need. See as picture 4.54; pic4.54 Return to Language & input, tap default to choose input method as you need. See shown picture 4.
Pic 4.55 4.14 Backup and reset Tap Backup my date after you have logged in Google account and connected WiFi the system will automatically backup your date to Google server. For some reasons you have to restore the factory settings, please tap restore the factory settings.; If you want to format MID NAND, please click on Erase USB Storage and tap reset tablet is ok. See as picture 4.56; Pic 4.
4.15 Date and Time As default setting, system will set the date and time automatically by using network-provided values. Set the date and time zone by hand 1． Click settings 2． scroll down the screen and click date and time. 3． Close Automatic date & time 4． Close Automatioc time zone Click Select time zone, and then choose time zone in the list. Scroll down the screen you can check more time zones.
4.16 Scheduled power on&off Tap settingsScheduled power on & off, see as below picture 4.58; Turn on/off of schedule power off Pic 4.58 4.17 Accessibility 4.17-1. Large text Click Large text can make the system font become larger 4.17-2．Press Power button to end call With this function, when you make a call and press “power” button, you phone call will automatically hang up but will not turn to sleep 4.17-3．Touch & hold delay Click Touch & hold delay can adjust the delay time, see as shown picture 4.
Pic 4.59 4.17-4. Install web scripts When you open it system will allow you install web scripts, but it will increase the security risk when you browser website. 4.18 Developer options 4.18-1 USB Debugging Once you open USB debugging, it can read the MID with some software. But when it opened the USB storage need to manually bring up before us. 4.18-2 Stay awake When you open stay awake, MID screen will never sleep while charging. 4.
Pic 4.6 4.19 About MID MID status Enter the settings application 1 Click About MID. Can view the status information, model No., Android version, version no. and other information. 2 Click “status information”, Can view the battery status, battery, SIM status, IMEI No., IP address, etc. 5. Multimedia 5.
Artists Loop Album Cover Playback Stop /Play Song Name last song pic 5.2 Drag the playback progress bar Next song to adjust audio playback progress Music player button operation is shown in pic 5.2 5.2 Video In the application menu or on the desktop, tap the icon to enter into the video player interface. Video player buttons described in pic 5.3 Play/Stop adjust video playback progress Select the screen mode Pic 5.
5.
5.4 Camera In the application menu or on the desktop, tap the icon Camera interface to enter into the Camera operation button and Switching camera as shown in pic 5.4 and pic 5.5 View photos and videos Switch front and rear camera click shooting Slide the zoom submenu Camera mode Panorama mode pic 5.4 Video camera Flash light back High range Adjust light settings dynamic balance Panorama mode Color effects pic 5.5 5.
Select the top right corner button pic 5.6 Open external audio Enter into the channel list Menu Current frequen cy Favorites button Last channel Next channel pic 5.6 Play /Stop Select the search, Then FM band can be found in. RDS Setting: click the Menu button on upper right corner in last picture, click the Settings button RDS, enter into RDS Setting, pic 5.8, Select the items you need to add pic 5.
Favorites: Click the button on the main interface to add to Favorites Note: Using FM Radio plug in your headphones as an antenna If no antenna, you will not be able to search the MID band radio 5.6 Analog TV (Optional functions) 5.6.1 In the application menu or on the desktop, tap the Analog TV & click the icon as figure 5.9 Pic 5.9 5.6.2 Select Area, pic 5.10 Pic 5.10 5.6.3 Search Channels, pic 5.11-5.
pic 5.11 pic 5.12 5.6.
Increase the volume= last channel The current volume Current channel 声音 Decreas e the volume Next channel Pic 5.13 6 Communication function 6.1 Phone Select the dialing application Operate according to Figure 6.1 Call records Contacts Dial-up area Show number Call Function keys Hide dialpad Pic 6.
6.2 SMS 6.2.1 In the application menu or on the desktop, tap the icon to enter into the SMS interface 6.2.2 Select edit new message Add recipients input the phone number directly Send message pic 6.2 6.
pic 6.3 Search for contacts: Click the button Add contacts: Click the button to enter into the search function to enter into the Add contact interface 7 Internet 7.1 Browser When wifi or net work are well connected, click to input IP address and can surf internet. 7.2 E-mail Email application with e-mail setup wizard, can add common Web e-mail service provider (Such as Yahoo, Gmail and 163 other provider) external POP3 or IMAP e-mail account. Figure 7.
pic 7.
6 Input a subject and message content 7 Click Add Attachment 8 Select the attachment you want to send (such as pictures, video, etc.) 9 Click the Sending key to send an e-mail Add Attachment pic 7.3 8 GPS function (optional feature) 8.1 GPS positioning 1 MID built-in GPS precise positioning satellite signal receiver. But available map is provide by third party. 2 Enter into the setting interface, click on the icon 8.
Return pic 8.1 After successfully positioned, blue part will be transformed into green. And display the latitude, longitude and altitude, speed, position location time. pic 8.2.Satellite value represent positioning signal of the intensity, Positioning time associated with the choice of setting time zone range. If time does not match with positioning location time, please check your time zone selection is correct Satellite value pic 8.2 Satellite No.
9 Other Applications 9.1 Clock In the application menu or on the desktop, tap the icon Clock to enter into the Clock interface, Figure 9.1 Click the alarm settings, alarm clock can be set Clock Setting pic 9.1 9.
pic 9.2 9.3 Explorer Explorer with the TF card files or folders to copy, cut, delete, rename and other operations can also share the file, install apk and other functions In the application menu or on the desktop, tap the icon Explorer interface, Figure 9.
Pic 9.3 A Some operationgs, such as copy, cut, delete, rename, etc. Select a folder or file, long press a folder or file to enter into Figure 9.4 Interface. pic 9.4 Paste the copied or cut file or folder: on the directory you want to paste, you can select the icon paste in the upper right corner to Pic 9.5 B.
" " In the pop-up list, select "Share" item. According to the pop-up list to select the way you want to share pic 9.6 C Install apk file: select the suffix. Apk file on the Explorer, pop up the installation program, follow the prompts to install third-party software D. Create new folder: Select the folder you want to create the directory, Click the right button , select the Creat New Folder, Follow the prompts to complete the Creat New Folder 9.
Figure 9.
10 Application Installation 10.1 Installation Install third-party applications 1 Tap on "Explorer" application, select the application you want to install 2 Press and hold the application you need to install 3 Pop-up installation options, click Install apk 4 Follow the installation wizard to complete then can be run. Note: Applications only with APK suffix are compatible with system. 10.
11 Troubleshooting 1. Turn on MID slowly for the first time 。After MID system upgrading, the first time turn on the MID need to install the pre-installed applications, time in about 2-3 minutes. But it will faster later. 2. Device can not connect to Wi-Fi Ensure the router works well. Ensure the device and the wireless router is within the range of the wireless network to be connected too.
FCC statement This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interfer ence that may cause undesired operation. *RF warning for Portable device: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
