User's Manual

S600 User Manual 7-4
Managing Your
Pocket PC Phone
Restore
1. Insert a miniSD card.
2. Tap
→ Settings → System → Backup.
3. Tap Restore
and then OK on the warning message.
4. Select the data type to restore and then tap Restore
to start the
restoring procedure.
5. When restoring is completed, please perform a software reset for
the change to take effect.
7.5 Adding or Removing Programs
Programs added to your Pocket PC Phone at the factory are stored in ROM (Read-Only Memory). You
cannot remove the programs and you will never accidentally lose ROM contents.
All other programs and data files added to your Pocket PC Phone after factory installations are stored
in RAM. You can install any program created for your Pocket PC Phone as long as your Pocket PC
Phone has enough memory.
Adding Programs
You will need to install the appropriate software for your Pocket PC Phone on your desktop computer
before installing it on your Pocket PC Phone.
1. Determine your Pocket PC Phone and processor type so that you know which version of the software
to install. Tap
→ Settings → System → About and make a note of the information in Processor.
2. Download the program to your desktop computer or, if you have a CD or disk containing the program,
insert the CD or disk into your desktop computer. You might see a single *.xip, *.exe *.zip file, a
Setup.exe file or several versions of files for different device types and processors. Be sure to select the
program designed for the Pocket PC Phone and your Pocket PC Phone processor type.
3. Read any installation instruction, Read Me files or documentation that comes with the program. Many
programs provide special installation instructions.
4. Connect your Pocket PC Phone and desktop computer.
5. Double-click on the *.exe file.
• If the file is an installer, the installation wizard begins. Follow the directions on the screen. Once
the software has been installed on your computer, the installer automatically transfers the software
to your Pocket PC Phone.
• If the file is not an installer, you will see an error message stating that the program is valid but it
is designed for a different type of computer. You will need to move this file to your Pocket PC
Phone. If you cannot find any installation instructions for the program in the Read Me file or docu-
mentation, use ActiveSync Explore to copy the program file to the Program Files folder on your
Pocket PC Phone. For more information on copying files using ActiveSync, see ActiveSync Help.
6. Once installation is complete, tap
→ Programs and tap the program icon to switch to it.
• You can also use Pocket Internet Explorer to download some programs from the Internet directly
to your Pocket PC Phone if your Pocket PC Phone is connected to Internet.