User's Manual

S600 User Manual 13-6
Getting Connected
Manual Configuration
If you need to set up the GPRS connection manually, follow this procedure:
1. Tap
→ Settings → Connections → Connections.
2. Tap
Manage existing connections.
3. The Pocket PC Phone has several existing connections for your selection. Tap the desired connection
and tap Edit. Or, tap New to create a new connection.
4. Enter a name for the connection.
In
Select a modem, select Cellular Line (GPRS).
Tap
Next.
5. Enter the access point name provided by your mobile phone service provider. Tap
Next.
6. Enter your user name, password, and domain name as provided by your ISP. If a domain name was
not provided, try the connection without entering a domain name. You should not need to change any
advanced settings. Tap
Finish.
7. The new connection is now on the connection list. Make sure you select the proper connection and tap
OK.
• To remove a GPRS connection from the list, tap and hold the connection, and tap
Delete.
13.3 Transferring Items Using Infrared
Use beaming software and hardware, such as infrared (IR), to send and receive information and files
between mobile devices. If an IR port is installed on your desktop computer, you can send and receive
information and files between your device and desktop computer.
When data transmission is not available, please note:
 Transfer only one file, or no more than 25 contact cards, at a time.
 When using IR, make sure nothing is between the two IR ports.
 Adjust the room lighting or move to another location (some types of light interfere with beaming).
Sending Information
1. Switch to the program where you created the item you want to
send and locate the item in the list.
2. Tap and hold the item and tap
Beam File on the pop-up menu.
• In Tasks, tap Beam Task
.
• In Contacts, tap
Beam Contact.
• In Calendar, tap Beam Appointment
.
3. Align the IR ports so that they are unobstructed and within a
close range.