User's Manual
13-5 S600 User Manual
Getting Connected
Setting up a Network Card
Use a network (Ethernet) card to connect directly to a network. Once the network is connected, you can
view the Internet or intranet, or download email. You do not need to create a new connection on your
device.
1. Obtain the following information from your network administrator: user name, password, and domain
name.
2. Insert the network card into your device.
3. The first time you insert the card, Network Settings will appear automatically so that you can configure
the network card. If it does not appear, or to change settings later, tap
→ Settings → Connections
→ Network Cards.
4. If you need to enter specific server information, tap the appropriate adapter, and then tap Name
Servers. Most networks use DHCP, so you should not have to change these settings unless your
network administrator instructs you to do so.
5. If necessary, connect the network card to the network by using a network cable. For information, see
the documentation that came with your network card.
6. To start a connection, insert the network card, and begin using a desired program. For example, switch
to Pocket Internet Explorer and browse to a Web page. Your device will automatically get connected.
• If you use your network card with two networks, such as a private network at work and one at
home for the Internet, you will need to change the network to which the network card connects.
13.2 GPRS/MMS Connections
GPRS is a high-speed transmission through the mobile phone network, which provides permanent on-line
connection.
When you apply for the GPRS service, your service provider may have already set up a GPRS connection
for you. You can also perform automatic or manual GPRS configuration on your Pocket PC Phone.
• If you have subscribed to the GPRS and MMS services from your mobile phone service provider,
GPRS connection is active, and so is MMS connection.
Automatic Configuration
Your Pocket PC Phone can perform automatic GPRS configuration.
Tap
→ Settings → Connections → GPRS Auto Configuration.
Select Auto Configuration, select your mobile phone service
provider, and then tap OK.