User's Manual

S600 User Manual 13-4
Getting Connected
3. In Name, enter a name for the connection, such as your
company name.
In
Host name/IP, enter the name and IP address of the VPN
server.
Next to
VPN type, select the type of authentication to use with
your device: IPSec/L2TP or PPTP. If you aren’t sure which
option to choose, ask your network administrator.
Tap
Next.
4. Select the type of authentication. If you select A pre-shared
key, enter the key provided by your network administrator.
Tap
Next.
5. Enter your user name, password, and domain name as provided by your network administrator. If a
domain name was not provided, try the connection without entering a domain name. You should not
need to change any advanced settings. Tap
Finish.
6. To start a connection, insert any necessary equipment, such as a network (Ethernet) card, into the
device, and begin using a desired program. For example, switch to Pocket Internet Explorer and
browse to a Web page. Your device will automatically get connected.
Setting up Proxy Server Settings
If you are connected to your ISP or private network during synchronization, your mobile device should
download proper proxy settings during synchronization from your desktop computer. If these settings are not
on your desktop computer or need to be changed, ask your ISP or network administrator for the proxy server
name, server type, port, type of Socks protocol used, and your user name and password.
1. Tap → Settings → Connections → Connections.
2. In My Work Network
, tap Add a new proxy server.
3. Select
This network connects to the Internet and This
network uses a proxy server to connect to the Internet
. In the
Proxy server box, enter the proxy server name.
4. To change such settings as port number or proxy server type, tap
Advanced and change desired settings.
5. When you are finished, tap
OK.