User Manual

8
Mounting the Fixture
The FreeStyle xtures have a universal mount.
The ball and socket mount allows the xture to be
oriented in a broad range of angles.
Align the center pin of the mounting plate to the
center hole on the mating plate.
Rotate plate clockwise until the four shoulder rivets
drop into the receptacle. A locking pin will snap into
place when the plate is properly seated.
The yellow wire loops (FreeStyle T41/21) provide
attachment points for a safety chain.
To remove the plate, pull up on the locking pin and
reverse the mounting procedure.
Lollipops are interchangeable.
MTP-L Kino 41 Lollipop w/ 3/8” Pin (10mm)
MTP-LBC Kino 41 Lollipop w/ Baby Receiver Curve
(16mm)
MTP-LBS Kino 41 Lollipop w/ Baby Receiver Short
(16mm)
Turn the knob to loosen or tighten the mount.