User Manual
Table Of Contents
- 3.1 【Main unit】
- 4.1 Tracking
- 4.2 Fixed upload
- 4.3 Blind spot data storage
- 4.4 Cornering compensation
- 4.5 Multiple position method
- 4.6 Built in antenna
- 4.7 Push to call
- 4.8 Temperature sensor
- 4.9 Built in battery
- 4.10 Quick charge function
- 4.11 Power save mode
- 4.12 Voice function
- 4.13 Remote setting
- 4.14（FOTA）
- 4.15 Multiple IPs connection
- 4.16 IP rated
- 5.1.1 SIM installation
- 5.1.2 Parameters setting
- 5.2.1 Upload interval setting
- 5.2.2 Position mode
8
4.8 Temperature sensor
The device has built in temperature to detect the environment temperature and send to
backend to analyze
4.9 Built in battery
The device is with built in lithium battery, it can real time upload the battery level status,
and there are 4 indicators on the device to indicate the battery level status for remotely
monitor the battery status
4.10 Quick charge function
The device has quick charge function, it supports V/2A or 5V/1A power adaptor and charge
via Micro-USB interface
4.11 Power save mode
Device has built in motion sensor to detect whether the device is in motion and static mode,
when the device in a static mode for a certain time, it will automatically enter into power
save mode, and only send heartbeat packet, when the g-sensor detects a motion, the device
will exit power save mode and enter into normal working status
4.12 Voice function
The device has built in waterproof microphone and speaker for dual communication or one
way communication
4.13 Remote setting
The device parameters, including IP, center number and other parameters can be
configured remotely