User Manual
Table Of Contents
- 3.1 【Main unit】
- 4.1 Tracking
- 4.2 Fixed upload
- 4.3 Blind spot data storage
- 4.4 Cornering compensation
- 4.5 Multiple position method
- 4.6 Built in antenna
- 4.7 Push to call
- 4.8 Temperature sensor
- 4.9 Built in battery
- 4.10 Quick charge function
- 4.11 Power save mode
- 4.12 Voice function
- 4.13 Remote setting
- 4.14（FOTA）
- 4.15 Multiple IPs connection
- 4.16 IP rated
- 5.1.1 SIM installation
- 5.1.2 Parameters setting
- 5.2.1 Upload interval setting
- 5.2.2 Position mode
7
4.2 Fixed upload
The device can be configured to upload the vehicle location, status info to the
backend at a certain time or at a certain period or according to certain time interval
4.3 Blind spot data storage
When the device enters the GPRS blind zone, the trace data will be saved at the
shortest interval which is 15s, and the blind zone data will be uploaded to the
platform when the GPRS is back online. The blind zone compensation data can be
saved up to 1,000 packets
4.4 Cornering compensation
When it uses as an asset tracker, when it enters the curve lane, the terminal detects
that the driving direction has a certain angular deviation (default 20 degrees), and a
timing upload message is added to ensure that the driving track is more accurate.
4.5 Multiple position method
Device can be positioned via BD/GPS/AGPS/LBS/WIFI 5, and the device would select the
position way according to signal strength for fast position, meanwhile increase the position
accuracy.
4.6 Built in antenna
Device has built in antennas, including quad band GSM antenna, BD, GPS, 2.4G wifi antenna.
4.7 Push to call
Device has SOS emergency button, push to call or send emergency alarm